598019
79
Zoom out
Zoom in
Previous page
1/88
Next page
77
ENGLISH
77
Machine actions Causes Solutions
The machine does not turn on. The machine is not connected to the
electric network, or the power but-
ton is in the “O” position.
Connect the machine to the electric
network and turn the power button to
the “I” position.
The machine is in demo mode.
The “ button was pressed and
held for more than 8 seconds.
Turn the machine o and back on
using the power button.
The drip tray gets  lled al-
though no water is drained.
Water is sometimes drained auto-
matically by the machine into the
drip tray to manage the rinsing of
the circuits and ensure optimum
machine performance.
This is a normal behaviour of the
machine.
The red
icon is always dis-
played on the machine.
The co ee grounds drawer has been
emptied with the machine o .
The co ee grounds drawer must al-
ways be emptied with the machine on.
Wait until the icon is displayed
before re tting the drawer.
The co ee grounds drawer has been
emptied with the machine on with-
out waiting at least 5 seconds before
inserting it back.
Wait until the
icon is displayed
before re tting the drawer.
The brew group cannot be
removed.
The brew group is out of place. Turn on the machine. Close the service
door. The brew group automatically
returns to the initial position.
The co ee grounds drawer is
inserted.
Remove the co ee grounds drawer
before removing the brew group.
The brew group cannot be
inserted.
The brew group is not in the o
position.
Make sure that the brew group in
the o position, as described in the
“Weekly Cleaning of the Brew Group
chapter.
The gearmotor is not in the correct
position.
Insert the drip tray and the co ee
grounds drawer. Close the service door.
Turn on the machine without inserting
the brew group. The gearmotor moves
back to the correct position. Turn o
the machine and reinsert the brew
group as described in the Weekly
Cleaning of the Brew Group chapter.
There is a lot of ground co ee
under the brew group.
Co ee is not suitable for automatic
machines.
It may be necessary to change the type of
co ee or the co ee grinder settings.
Co ee is not hot enough. The cups are cold. Preheat the cups with hot water.
The temperature is not correctly set. Set the temperature as described in the
"Programming" chapter.
The co ee is too weak (see
note).
This might occur when the machine
is automatically adjusting the dose.
Brew a few cups of co ee as described
in the “Saeco Adapting System chapter.
Co ee is too coarse. Change co ee blend or adjust grinding
as explained in the Adjusting the
Ceramic Co ee Grinder” chapter.
Co ee does not have enough
crema
(see note).
The blend is unsuitable, co ee is not
freshly roasted or the grind is too
coarse.
Change co ee blend or adjust the
grind setting as explained in the
Adjusting the Ceramic Co ee Grinder
chapter.
79


Need help? Post your question in this forum.

Forumrules
1

Forum

philips-hd8828

Reset search

  • The coffee machine does not function. It displays a red small little spanner with fault code 22. How do I fix this? Submitted on 17-12-2019 at 17:04

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips HD8828 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips HD8828 in the language / languages: English as an attachment in your email.

The manual is 5,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips HD8828

Philips HD8828 User Manual - German - 84 pages

Philips HD8828 User Manual - Dutch - 84 pages

Philips HD8828 User Manual - French - 88 pages

Philips HD8828 User Manual - Spanish - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info