445816

Philips HD4738 Manual

9
Zoom out
Zoom in
Previous page
1/56
Next page
Do not exceed the volume indicated in the table for congee cooking, as this may cause the rice
cooker to overow.
2 Set the function selection switch to CONGEE (Fig. 15).
, The congee light goes on (Fig. 16).
3 Press the control lever down to start the congee cooking process. (Fig. 17)
Note: Stir the congee halfway through the cooking process. This prevents the congee from sticking to the
pot.
4 To end the congee cooking process, pull up the control lever, switch off the mains and
remove the mains plug from the wall socket (Fig. 18).
At the end of the congee cooking process, the rice cooker does not switch to the keep-warm
mode.
Do not leave the rice cooker switched on too long after the actual cooking process has nished, as
this will cause the congee to turn gluey.

1 Measure 3 cups of water with the measuring cup and pour the water into the inner pot.
The amount of water varies according to the quantity of food being steamed.
It takes approx. 8 minutes for 3 cups of water to come to the boil.
2 Put the food to be steamed on a plate or in the steam tray.
To ensure even steaming, spread out the food evenly and do not pile it up.
3 Put the steam tray in the inner pot.
When you combine steaming and rice cooking, make sure you measure out an amount of rice that
leaves enough room for the steam tray. The steamed food will be ready when the rice cooking
process is nished.
4 If you use a separate plate, put it in the steam tray.
5 Follow steps 7 to 10 in section ‘Cooking rice’.
, The cook light/rice light goes on and the steaming process starts.
, The steamed food is ready when the rice cooking process is nished.
6 Open the lid and carefully remove the steamed food from the plate or steam tray. Use a
kitchen glove or a cloth, as the plate and the steam tray are very hot.
Beware of the hot steam.
7 To end the steaming process, pull up the control lever, switch off the mains and remove the
mains plug from the wall socket (Fig. 14).

This mode allows you to keep your rice warm for a longer period of time.
When the rice cooking process is nished, the rice cooker automatically switches to the keep-warm
mode. The cook light/rice light goes out and the keep-warm light goes on.
We advise you to keep rice warm for not more than 12 hours so as to preserve its taste.
The cook light/rice light may go on occasionally to indicate that the temperature inside the rice
cooker has become too low and the heating element has switched on to heat up the rice cooker to
the right keep-warm temperature.
To end the keep-warm mode, pull up the control lever, switch off the mains and remove the mains
plug from the wall socket.
The congee cooking process does not have a keep-warm mode.
 9
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips HD4738 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips HD4738 in the language / languages: English as an attachment in your email.

The manual is 1,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info