445816
8
Zoom out
Zoom in
Previous page
1/56
Next page
Menu Volume/L Quantity of rice
(cups)
Volume/L Quantity of rice
(cups)
Congee (HD4738/
HD4733 only)
1.5 0.25-1 1.8 0.5-1.5
2 Wash the rice thoroughly.
Use a separate container to wash the rice to avoid damaging the non-stick coating of the inner pot.
3 Put the pre-washed rice in the inner pot.
4 Add water to the level indicated on the scale inside the inner pot that corresponds to the
number of cups of rice used. Then smooth the rice surface.
For instance, if you cook 4 cups of rice, add water up to the 4-cup level indicated on the scale.
Note: Some types of rice require more water to be cooked, e.g. parboiled rice. If the water in the inner
pot exceeds the next level above the level indicated for the number of cups of rice used, bubbles or water
may come out of the steam vent cap. If you want to cook a type of rice that requires more water, do not
cook more than 2-8 cups for HD4738/HD4728, 2-6 cups for HD4733 or 1-3 cups for HD4723 to
prevent the inner pot from overowing.
, HD4738 (Fig. 3)
, HD4733 (Fig. 4)
, HD4728 (Fig. 5)
, HD4723 (Fig. 6)
Note: The level marked inside the inner pot is just an indication; you can always adjust the water level for
different types of rice and your own preference.
5 Press the release lever to open the lid.
6 Put the inner pot in the rice cooker. Check if the inner pot is in proper contact with the
heating element (Fig. 7).
Make sure that the outside of the inner pot is dry and clean and that there is no foreign residue on
the heating element or the magnetic switch.
7 Close the lid of the rice cooker, put the plug in the wall socket and switch on the mains.
, HD4728/HD4723: The cook light goes on to indicate that the appliance is on. (Fig. 8)
8 HD4738/HD4733: Set the function selection switch to RICE (Fig. 9).
, HD4738/HD4733: The rice light goes on (Fig. 10).
9 Press the control lever down to start the cooking process (Fig. 11).
If you fail to press down the control lever, the rice cooker automatically switches to the keep-warm
mode. The cook light/rice light goes out and the warm light goes on.
, When the cooking process is nished, the cook light/rice light goes out and the warm light
goes on to indicate that the rice cooker has automatically switched to the keep-warm
mode (Fig. 12).
10 Open the lid and stir the rice to loosen it (Fig. 13).
For the best results, do this just after the rice cooker has switched to keep-warm mode. Then close
the lid rmly. Stirring the rice allows excess steam to escape. This gives ufer rice.
11 To end the cooking process or keep-warm mode, pull up the control lever, switch off the
mains and remove the mains plug from the wall socket (Fig. 14).

1 Follow steps 1 to 7 in section ‘Cooking rice’.
8
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips HD4738 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips HD4738 in the language / languages: English as an attachment in your email.

The manual is 1,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info