20
C
8 Place the flat blade of a screwdriver behind the cooling
element and pry the cooling element off the back of the
aluminium plate by twisting the screwdriver.
C
9 Then cut the wires attached to the cooling element.
Do not connect the appliance to the mains again after removal of the
cooling element.
Never reassemble the cooling element once you have removed it!
10 Hand the cooling element in at an official collection point for
chemical waste.
Guarantee & service
If you need information or if you have a problem, please visit the Philips
website at www.philips.com or contact the Philips Customer Care
Centre in your country (you will find its phone number in the
worldwide guarantee leaflet). If there is no Customer Care Centre in
your country, turn to your local Philips dealer or contact the Service
Department of Philips Domestic Appliances and Personal Care BV.
When you bring the appliance back to your dealer or a Philips service
centre for determination of the cause of the problem, also bring the
tube and the keg.
Guarantee restrictions
Your guarantee becomes invalid if:
- you do not use the appliance in accordance with these instructions
for use.
- you use damaged kegs in this appliance.
- you do not install the kegs in accordance with the instructions.
- you use kegs from other suppliers than the ones mentioned in these
instructions for use.
◗ The kegs and tubes are not covered by this guarantee.
ENGLISH
