368446

Philips hb 567 Manual

9
Zoom out
Zoom in
Previous page
1/72
Next page
Possible causes/solutions
The plug has not been properly inserted into the wall socket.
There may be a power failure. Check if the power supply works by connecting another appliance.
You have not set the time.
Perhaps you forgot to switch the facial tanner on.
The lamp of the facial tanner (HB568 only) is still too hot to go on.Allow the lamp to cool down for
approx. 3 minutes.
Check the fuse of the circuit to which the tanning appliance has been connected.The correct fuse type
is a 16A standard fuse (in the UK a 13A fuse for HB567) or a slow-blow automatic fuse.
You are using an extension cord which is too long or does not have the correct current rating. Consult
your dealer. Our general advice is not to use an extension cord.
You are not following the tanning schedule suitable for your skin type. Check the table in 'Tanning
sessions: how often and how long?'.
The distance between your body and the canopy is larger than 20 cm.
When the lamps have been used for a long time, the UV light emitted will decrease.This effect only
becomes noticeable after several years.You can solve this problem by selecting a slightly longer tanning
time or by replacing the lamps.
Read the last part of the section 'Natural fragrances' in the chapter 'Using the appliance'.
Problem
The appliance does not start.
The facial tanner does not start.
The fuse cuts off the power when the appliance is
switched on or during use.
Poor tanning result.
Not enough fragrance.
Troubleshooting
If the appliance has not been installed or is not used in accordance with the instructions, it may fail to work properly. In that case you will be able
to solve the problem yourself by following the troubleshooting tips below.
If the problem is not mentioned in the list, the appliance may not work properly because it has a defect. In that case we advise you to contact
your dealer or an authorised Philips service centre.
ENGLISH 9
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips hb 567 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips hb 567 in the language / languages: Dutch as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info