666374

Philips GC4932 Manual

6
Zoom out
Zoom in
Previous page
1/38
Next page
ENGLISH
10
Problem Possible cause Solution
The iron is not hot enough yet
to product steam.
Wait until the ‘iron ready’ light has
stopped breathing and lights up steadily.
Water droplets drips
onto the garment
during ironing.
You have used the steam
boost function too often
within a short period.
Continue ironing in horizontal position
and wait a while before you use the
steam boost function again.
You have not closed the water
tank lid properly.
Press the lid until you hear a ‘click’.
You have not insert the
Quick Calc Release collector
properly back to the appliance
(specic types only).
Stop ironing and let the iron cools down
for at least 1 hour. Take out the Quick
Calc Release collector. Insert it back into
the appliance and ensure the collector is
in-line with the surface of the appliance.
Push down the lever (“click”).
If the Quick Calc Release collector is
damaged, contact a consumer care
center in your country (see the world wide
guarantee leaet for contact details).
The iron does not
produce a steam
boost.
You have used the steam
boost function too often
within a short period.
Continue ironing in horizontal position
and wait a while before you use the
steam boost function again.
The iron is not hot enough for
ironing yet.
Wait until the ‘iron ready’ light has
stopped breathing and lights up steadily.
You have put a chemical into
the water tank.
Rinse the water tank and do not put any
perfume or chemicals into the water tank.
Dirty water and
impurities come
out of the soleplate
during ironing.
Hard water with impurities or
chemicals has formed akes
inside the soleplate.
Perform Quick Calc Release (specic
types only) or Calc-Clean (specic types
only).
See chapter “Cleaning and maintenance”.
Water drips from
the soleplate after
the iron has been
unplugged.
You have put the iron in
horizontal position with water
still left in the water tank.
Empty the water tank after use, or store
the iron in vertical position.
The steam slider is set to . Set the steam slider to .
There is an amber
light ashing on the
handle of the iron.
The Calc-Clean reminder light
is activated. This is to remind
you to perform calc clean.
Perform Quick Calc Release (specic
types only) or Calc-Clean (specic
types only). See chapter “Cleaning and
maintenance”.
The iron leaves a
shine or an imprint on
the garment.
The surface to be ironed was
uneven, for instance because
you ironed over a seam or a
fold in the garment.
The iron is safe to use on all ironable
garments. The shine or imprint is not
permanent and disappears when you
wash the garment. Avoid ironing over
seams or folds. You can also place a
cotton cloth over the area to be ironed to
avoid imprints.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips GC4932 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips GC4932 in the language / languages: English, German, Dutch, Danish, French, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 22,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info