Manual Philips GC4932 (page 5 of 38) (English, German, Dutch, Danish, French, Swedish, Norwegian, Finnish)

666374

Zoom out

Zoom in

1/38

ENGLISH

5 Gently shake the appliance to allow scale particles to fall out (Fig. 2-8).

6 Insert the Quick Calc Release collector back into the appliance (Fig. 2-10).

7 Push down the lever (“click”) to lock the collector (Fig. 2-11).

Calc-Clean (specic types only)

IMPORTANT: After 1 to 3 months of use, the Calc-Clean reminder light starts ashing to

remind you to use the Calc-Clean function (Fig. 3-1). This is to remove scales in your iron

to prolong its life.

Tip: The Calc-Clean function can be used at any time, even when the reminder light is

not activated yet. If you live in a hard water area, use the function more frequently.

1 Make sure that the steam slider is set to “steam o” position (Fig. 3-2).

2 Make sure there is enough water (more than 3/4) in the water tank. If there is not

enough water, unplug the iron, ll the water to MAX indication (Fig.3-3) and plug in

the iron again (Fig.3-4).

Do not pour vinegar or other descaling agents into the water tank.

3 Wait for the iron to heat up. This takes about 2 minutes (Fig.3-5).

Note: the Calc-Clean reminder light turns o during heating up. .

4 Unplug the iron when the ‘iron ready’ light stops breathing (Fig. 3-7).

5 Hold the iron over the sink. Keep pushing the Calc-Clean button and gently shake

the iron forth and back until all water in the water tank has been used up (Fig. 3-8).

Scales is ushed out, steam and boiling water also come out of the soleplate.

Note: Repeat steps 2 to 5 if the water that comes out of the appliance still contains

scale particles.

6 Plug in the appliance and let the appliance heat up to dry the soleplate. This takes

about 2 minutes (Fig. 3-9).

7 Unplug the appliance (Fig. 3-10). Move the appliance gently over a piece of cloth to

remove any water stains on the soleplate (Fig. 3-11).

Troubleshooting

This chapter summarises the most common problems you could encounter with

the appliance. If you are unable to solve the problem with the information below,

visit www.philips.com/support for a list of frequently asked questions or contact

the Consumer Care Centre in your country.

Problem Possible cause Solution

The iron cannot

remove wrinkles from

the garment.

There is no steam during

ironing.

Fill the water tank and set the steam

slider to .

The iron does not

produce any steam.

There is not enough water in

the tank.

Fill the water tank.

The steam slider is set to . Set the steam slider to .

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips GC4932 in the language / languages: English, German, Dutch, Danish, French, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 22,07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips GC4932 Manual

Product: