301428
83
Zoom out
Zoom in
Previous page
1/88
Next page
ErgoLine D310/320
Customer Engineer Manual
Page 5-
9
Adjusting the EAZ for D310:
The two settings EAZ can be programmed as follows:
1 place handset on hook
2 press PROGRAM key
3 press “9”
4 press PROGRAM key
5 press a character to change the setting for EAZ.
6 The character can be a digit,
0
to
9
, or
*
.
7 Press PROGRAM key to select this setting
The default setting is ‘*’ for EAZ
EAZ Outgoing call set up is
made with: (see
remarks)
Terminal accepts incoming
calls with:
‘0’-‘9’ EAZ: ‘0’-‘9’ EAZ: ‘0’-‘9’
‘*’ ‘0’ All incoming calls are
accepted
T
ABLE
5.3: EAZ
ADJUSTMENT FOR
D310
Notes
:
On an outgoing call set up from the terminal, the PABX (of the iS3000 series)
looks for a directory number (DNR) that is defined for the U
PN
port or S
0
-bus and
that matches the EAZ. If not found the PABX continues to allocate any other
DNR at the U
PN
port or S
0
-bus that matches the service profile. So for a 2 wire
terminal, connected via the U
PN
interface, the EAZ (D310) or EAZ-1 (D320)
should be set as
*
or
2
(2 is the default value of the PABX). For EAZ-2 (D320) no
value needs to be specified.
A 4 wire terminal, connected via the S
0
interface, normally requires that the
EAZ (D310) or EAZ-1 (D320) of the first terminal be set to
2
, and the EAZ (D310) or
EAZ-1 (D320) of the second terminal be set to
3
. (Connecting 2 terminals in this
way is called co-location. Co-location is only possible with 4 wire terminals).
EAZ-2 is not required.
This is however not a rule. For example, if terminal-1 gets EAZ-1=2 and EAZ-2=3,
while terminal 2 gets EAZ-1=3 and EAZ-2=2, then on an incoming call for
terminal 1, terminal 2 will ring simultaneously. On an incoming call for terminal 2,
terminal 1 will ring simultaneously. The call can be answered by both terminal 1
and terminal 2. This is of course is only possible when terminals are co-located
and when these terminals support separate EAZ adjustment for incoming and
outgoing calls. Only the D320-4W supports both these conditions.
In case of malfunction (for example, incoming calls are not accepted, or the
terminal sets up calls with the wrong directory number) check the EAZ setting.
83


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips ergoline d340 2 dg at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips ergoline d340 2 dg in the language / languages: English as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips ergoline d340 2 dg

Philips ergoline d340 2 dg User Manual - Dutch - 99 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info