26364
52
Zoom out
Zoom in
Previous page
1/80
Next page
52 12. Troubleshooting
Machine Functions
Cleaning and Aligning
Cartridges
If the printing quality declines, the cartridges must be
cleaned or realigned.
1 Press MENU/OK and 8211. e cartridges
are cleaned.
2 Start the cartridge alignment with MENU/OK
and 8212. Your multifunction machine will
print out a test page to automatically configure
the correct parameter settings for the best possible
printing quality.
²
For optimal printing quality, we recommend
aligning the cartridges after every change.
If the printing quality is still unsatisfactory, you must
manually clean the cartridges:
1 Open the machine and take the cartridges out of
the holder (see also Changing Cartridges). Clean
the contacts (A) with a dry, lint-free cloth.
2 Lay a lint-free cloth on a flat surface. Moisten half
the cloth (A). Hold the cloth firmly to prevent it
from wrinkling. Place the “nose” (= nozzle side) of
the cartridges against the moistened area (A) and
pull the cartridge a single time in the direction in-
dicated by the arrow (B) into the dry area (C).
Æ
Be sure to hold the cartridge in the correct po-
sition according to the figure above to prevent
damaging the nozzles!
Never touch the nozzles and contacts with bare
fingers and do not shake the cartridges.
Service Codes
With function 83 you can check and configure the fac-
tory settings.
Checking the Firmware Version
e firmware defines the basic functions and capabili-
ties of your multifunction machine.
Check our homepage for information on the current
firmware version that is available for your machine
and update the firmware, if necessary (see section PC
Functions / Using C S IH / Firmware
Update).
1 Press MENU/OK and 83.
2 Enter the following code using the number keypad:
704100, then press OK.
3 Use / to select ARE YOU SURE: YES, and
confirm with OK. e display shows the current
firmware version of your machine.
²
If you have entered the incorrect code, you
can cancel the entry with ARE YOU SURE:
NO.
Deactivating the Button
Sounds
Every button press is accompanied by a sound. You can
switch off the button sounds on your machine.
1 Press MENU/OK and 83.
2 Enter the following code using the number keypad:
102300, then press OK.
3 Use / to select ARE YOU SURE: YES, and con-
firm with OK. e button sounds are deactivated.
Follow steps 1 to 3 to reactivate the button tones.
²
If you have entered the incorrect code, you
can cancel the entry with ARE YOU SURE:
NO.
Power Cycling
If a problem occurs that cannot be corrected with the
instructions in this user manual, follow the steps be-
low.
1 Unplug the power cord.
2 Wait at least ten seconds, then plug the power cord
back in.
3 If the same problem continues to occur, please con-
tact our technical customer service (see back page
of this user manual) or contact your retailer.
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips CRYSTAL650 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips CRYSTAL650 in the language / languages: English as an attachment in your email.

The manual is 6,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips CRYSTAL650

Philips CRYSTAL650 User Manual - German - 88 pages

Philips CRYSTAL650 User Manual - Dutch - 88 pages

Philips CRYSTAL650 User Manual - Italian - 84 pages

Philips CRYSTAL650 User Manual - Spanish - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info