380906
8
Zoom out
Zoom in
Previous page
1/68
Next page
Disassembling the blender
1 Unplug the appliance.
2 Remove the lid with the measuring cup from the blender jar.
3 Remove the blender jar with the blade unit attached to it from the motor unit.
4 Always clean the removable parts immediately after use.
Tips
If you want to crush ice cubes, put not more than 6 ice cubes (of approx. 24x35x25mm) in the
blender jar and turn the control knob to pulse position a few times.
Cut meat or other solid ingredients into smaller pieces before putting them in the blender jar.
Do not process a large quantity of solid ingredients at the same time. To get good results, we
advise you to process these ingredients in a series of small batches.
To make tomato juice, cut the tomatoes in four and drop the pieces through the opening in the
lid onto the rotating blades.
Cleaning
We advise you to clean the removable parts immediately after use.
Always unplug the appliance before cleaning.
Never clean the motor unit, the blade units, the lter and the sealing rings in the dishwasher.
Always disassemble all removable parts before cleaning them. Do not forget to remove the
sealing rings from the blade units (blender and mill).
Avoid touching the blades. The blades are very sharp.
The blender and mill jar (without blade unit), lid and measuring cup are dishwasher-proof.

Clean the motor unit with a moist cloth. Do not rinse the motor unit under the tap. Do not
use abrasives, scourers, alcohol, etc.
Blender
1 Assemble the blender jar (see chapter ‘Using the appliance’).
2 Pour lukewarm water and some detergent into the blender jar.
3 Place the lid on the blender jar and insert the measuring cup into the hole in the lid.
4 Plug in the appliance.
5 Put the blender jar onto the motor unit (see chapter ‘Using the appliance’)
6 Switch the appliance on and let it run for a few seconds.
7 Switch off and unplug the appliance.
8 Remove the blender jar from the motor unit, take off the lid and rinse the blender jar with
clean water.
Storage
You can store excess mains cord by winding it round the base of the motor unit.
Environment
Do not throw the appliance away with the normal household waste at the end of its life, but
hand it in at an ofcial collection point for recycling. By doing this you will help to preserve
the environment. (Fig. 7)
-
-
-
-
,
,
,
,
,
ENGLISH8
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips comfort blender hr 1720 06 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips comfort blender hr 1720 06 in the language / languages: Dutch as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info