380906
6
Zoom out
Zoom in
Previous page
1/68
Next page
6
General description (Fig. 1)
A Motor unit
Blender
B On/off/pulse knob
C Blender jar with level indication
D Blade unit
E Sealing ring
F Lid
G Measuring cup
Important
Read these instructions for use carefully before using the appliance and save them for future
reference.
General
Check if the voltage indicated on the appliance corresponds to the local mains voltage (110-
120/127V, or 220-230/240V) before you connect the appliance.
If the mains cord is damaged, it must be replaced by Philips, a service centre authorised by
Philips or similarly qualied persons in order to avoid a hazard.
Always unplug the appliance from the mains before assembling, disassembling or making
adjustments to any of the accessories.
Never switch the appliance on and off by turning the accessories.
Never immerse the motor unit in water or any other uid, nor rinse it under the tap. Use
only a moist cloth to clean the motor unit.
Never let the appliance run unattended.
Keep the appliance out of the reach of children.
Avoid touching the blades, especially when the appliance is plugged in. The blades are very
sharp!
Never reach into the blender jar with your ngers or an object while the appliance is
running.
Never place the blade unit onto the motor unit without having the (blender or mill) jar
properly attached.
If the blades get stuck, unplug the appliance before removing the ingredients that are blocking
the blades.
If necessary use a spatula to remove food from the wall of the jar after you have switched off the
appliance.
Always make sure that the blade unit is correctly assembled before you plug the appliance in
and switch it on.
Never use any accessories or parts from other manufacturers that have not been specically
advised by Philips. Your guarantee will become invalid if such accessories or parts have been
used.

This Philips appliance complies with all standards regarding electromagnetic elds (EMF). If handled
properly and in accordance with the instructions in this instruction manual, the appliance is safe to
use according to scientic evidence available today.
Blender
Never ll the blender jar with ingredients that are hotter than 80 cC.
To prevent spillage, do not put more than 1.25 litres of liquid in the blender jar, especially
when you are processing at a high speed. Do not put more than 1 litre in the blender jar
when you are processing hot liquids or recipes that create a great deal of foam.
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
ENGLISH
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips comfort blender hr 1720 06 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips comfort blender hr 1720 06 in the language / languages: Dutch as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info