445486
11
Zoom out
Zoom in
Previous page
1/34
Next page
Use the Zoom ring to adjust the size of the image.
Use the Focus ring to adjust the focus of the image.
To raise:
Keep knob A pressed and lift to raise the projector.
The Height/Level Adjuster B will come out.
To Lower:
Keep knob A pressed and gently lower the projector.
Use the Focus Ring and Zoom Ring to readjust the focus and size of the image.
If projector and screen are not properly placed, the picture will be distorted, producing a
keystoned image (picture top width larger than picture bottom width or vice versa).When a
keystoned image occurs the 4:3 ratio will still be guaranteed.This is especially important when
the projector is being used together with an intelligent whiteboard.
Keystone correction allows you to correct picture distortion of the vertical keystone type by
internal scaling.This correction function is accessible through the Keystone Correction option in
the Settings menu of the On Screen Display (OSD) menu.
Preparation
1 Press the Standby button twice to put the projector in Power/Standby.
The Standby indicator starts blinking orange.
2 Wait until the cooling fan has stopped (about 3 minutes after the projector has been put in
Standby) and disconnect the mains lead and all other cables.
3 Put the lens cap back in place to prevent dust, dirt or other contamination from harming or
damaging the front of the projector lens when moving the projector.
Never place the projector on the side where the connections are located.
Moving/transporting the projector
The projector contains many glass and precision parts. If you need to transport the projector,
please follow these packing instructions to pervent accidental damage to the projector.
When you are hand-carrying the projector, be sure to use a carrying case like the optional
softbag.
When shipping the projector, use the original packaging material if possible. If you do not
have the original packaging, use equivalent materials, placing plenty of cushioning around the
projector.
When transporting the projector as freight or checked luggage, first put it in a carrying case,
then pack it in a firm box, using cushioning around the case.
1 Push and slide the lid in the direction of the arrow.
2 Install two AAA batteries as indicated inside the battery compartment.
3 Replace the lid and snap it into place.
The maximum range of the remote control is approximately 15 m (± 50 feet).
Adjusting the focus and
size of the image
Adjusting the vertical angle
of the projector
Keystone correction
Moving/transporting the
projector
Note
Philips Multimedia Projector 11 English User guide bSure1 / bSure 2
3. Set up
Focus ring
Zoom ring
P
S
/2
U
S
B
A
u
d
i
o
L
A
u
d
io
R
V
i
d
e
o
Y
P
b
P
r
G
B
R
S
-V
i
d
e
o
D
a
t
a
A
u
d
io
in
D
a
t
a
P
S
/2
U
S
B
A
u
d
i
o
L
A
u
d
io
R
V
id
e
o
Y
P
b
P
r
G
B
R
S
-
V
i
d
e
o
D
a
t
a
A
u
d
io
in
D
a
t
a
A
B
>
Inserting the batteries in
the remote control
Note
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips bSure 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips bSure 2 in the language / languages: English as an attachment in your email.

The manual is 2,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info