380904
10
Zoom out
Zoom in
Previous page
1/164
Next page
- Do not process dry ingredients for more than 1 minute.
- Cut solid ingredients into smaller pieces before you put them in the blender jar. Do not process
a large quantity of solid ingredients at the same time. Process these ingredients in a series of
small batches instead.
- If you are not satised with the results when you blend solid ingredients, use the pulse setting a
few times to let the blender run briey. If you want to use a spatula, switch off the appliance,
open the lid and then stir the ingredients. You can also remove some of the contents of the jar
and process smaller amounts.
- To crush ice cubes, put max. 5 cubes in the jar at a time and press the ICE button a few times.
HR2170 only: The jar is made of glass and therefore breakable. Do not drop the jar on a hard
oor. Also avoid extreme thermal shocks. If the jar is very cold, rinse it well with lukewarm water
before you pour hot liquid into it. If the glass jar cracks, stop using it.

You can use the lter to obtain extra nely blended sauces, fresh fruit juices or cocktails. All pips and
skins are caught in the lter.
HR2170/HR2160: You can order the lter (type number HR2963) from your Philips dealer.
Never ll the lter beyond its metal part.
Do not use the lter to process hot ingredients.

1 Assemble the blender jar onto the motor unit (see section ‘Preparing the blender for use’ in
this chapter).
2 Put the lter in the blender jar (Fig. 8).
Make sure the lter is placed properly on the bottom of the jar.
The grooves of the lter and the ribs inside the blender jar help you put the lter in the right
position.
3 Close the lid.

1 Put the ingredients in the lter through the opening in the lid.
Cut fruits into smaller pieces and soak dried pulses, such as soy beans, before you process them in
the lter.
2 Add water or another liquid.
3 Put the measuring cup in the lid, set the control knob to the highest speed and let the
appliance run for max. 40 seconds.
4 Set the control knob to 0 and remove the blender jar from the motor unit.
5 Pour out the drink through the spout of the blender jar (Fig. 9).
Make sure the lid is closed and the measuring cup is in the lid. This prevents pulp and skins from
ending up in your drink.
6 For optimal results, put the jar with the remaining ingredients back onto the appliance,
without opening/removing the lid. Then let the appliance run for a few more seconds.
7 Pour out the rest of the drink.
8 When you have nished processing, set the control knob to 0 and unplug the appliance.
10
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips blender 600 w 2 l at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips blender 600 w 2 l in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 9,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info