380904
9
Zoom out
Zoom in
Previous page
1/164
Next page


, The blender is intended for:
- Blending uids, e.g. dairy products, sauces, fruit juices, soups, mixed drinks, shakes.
- Mixing soft ingredients, e.g. pancake batter or mayonnaise.
- Pureeing cooked ingredients, e.g. for making baby food.

1 Screw the blender blade unit clockwise onto the blender jar (Fig. 2).
2 Mount the blender jar with the blade unit attached to it onto the motor unit and turn it
clockwise until it locks into position (Fig. 3).
3 Put the ingredients in the blender jar.
Let hot ingredients cool down before you put them in the blender jar (max. temperature
80°C/175°F).
4 HR2170 only: fasten the lid on the jar by pressing it down (1) and turning it clockwise
(2). (Fig. 4)
Note: Make sure that the sieve in the lid is positioned in front of the spout of the jar to be able to pour
out liquids.
5 HR2168/HR2167/HR2161/HR2160 only: close the lid.
6 Insert the measuring cup into the lid (Fig. 5).
Note: To disassemble the blender, follow the instructions above in reverse order and direction.

Never reach into the jar with your ngers or an object (e.g. a spatula), while the blender is
running.
Do not exceed the maximum level indicated on the blender jar.
1 Put the mains plug in the wall socket.
2 Switch on the appliance. (Fig. 6)
Note: See the blender table at the end of this user manual for the recommended quantities, speed
settings and processing times.
- To process ingredients at a particular speed, turn the control knob to the required speed setting.
Do not let the appliance run for more than 2 minutes at a time. Let the appliance cool down to
room temperature before you continue processing.
- To process ingredients very briey, turn the control knob to the pulse setting (P) several times.
Never use the pulse setting longer than a few seconds at a time.
- To crush ice, press the ICE button.
3 When you have nished processing, set the control knob to 0 and unplug the appliance.
Always set the control knob to 0 before your open the lid.

- To prevent spillage, do not put more than 1.5 litres of liquid in the blender jar, especially when
you process at a high speed. Do not put more than 1 litre in the blender jar when you process
hot liquids or ingredients that tend to foam.
- You can use the opening in the lid to add ingredients while the appliance is running (Fig. 7).
 9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips blender 600 w 2 l at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips blender 600 w 2 l in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 9,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info