476594
34
Zoom out
Zoom in
Previous page
1/54
Next page
User Manual BDL4771V
RETURN TO THE CONTENTS
some instances, ghost image damage can be permanent. To avoid such issues, we strongly recommend one of
the following actions:
• Change the picture periodically
• Enable Pixel shift (See Pixel shift under Section 4.2.4.Configuration 1 MENU)
• Use a screen saver with changing images
Network settings
To set the display to connect to a local area network:
1. Connect a RJ-45 cable to the corresponding ports on the display and your LAN switch or router.
2. Enter the submenu of Network settings. You will see the OSD page similar to the following picture.
3. Use the UP/DOWN/PLUS/MINUS buttons to set the Network device name.
4. If you are in a DHCP environment, highlight DHCP and select Enable. Once selected, the IP address,
Subnet mask, and Default gateway settings will be displayed.
If you are not in a DHCP environment, highlight DHCP and select Disable. Contact your ITS
administrator for information on the IP address, Subnet mask, and Default gateway settings and
enter it accordingly.
5. Make sure the information on the Login user name is displayed.
6. Use the UP/DOWN/PLUS/MINUS buttons to set Login password. The password is required when
using a computer browser to log in.
7. To control the display with a computer browser, highlight LAN control port and select Enable.
8. To save the settings and return to the previous menu, highlight Set and press the SET button on the
remote control.
Once you have the correct IP address for your display and the display is on or in standby mode, you can use
any computer that is on the same local area network to control the display.
Notes:
• You cannot control the display via RS-232C when LAN is being used.
• Currently most browsers are supported. However, if using Internet Explorer, only versions 7.0 or higher are supported.
• The screen shots in this manual are for reference only, and may differ from what is displayed on your screen.
1. Enter the address of the display in the address bar of your browser and press Enter. The Login page
appears. Here is an example of the complete address: http://172.16.0.1/html.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips BDL4771V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips BDL4771V in the language / languages: English as an attachment in your email.

The manual is 7,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info