476594
33
Zoom out
Zoom in
Previous page
1/54
Next page
User Manual BDL4771V
RETURN TO THE CONTENTS
4.2.4. Configuration 1 MENU
Switch on state
Set the display to turn on or remain off when the power cord is connected to a wall outlet.
Use the UP/DOWN button to toggle between
Last status - The display will return to the previous power status (on/off/standby) when removing and
replacing the power cord.
Forced on - The display will turn on when the power cord is connected to a wall outlet.
Power off - The display will remain off when the power cord is connected to a wall outlet.
Note: If you unplug the power cord and re-plug within 7 seconds, the display will not work under the selected setting.
Auto adjust
Note: For VGA input only.
Use this function to automatically optimize the VGA image within the display. Press SET to adjust.
Power save
Set the display to reduce the power consumption.
Use the UP/DOWN button to toggle between
PC - Select On to let the display enter DPMS (Display Power Management Signaling) mode when no signal
can be detected from the HDMI, DVI-D, and VGA inputs after three successive cycles. Use the PLUS/
MINUS button to make selection.
Video - Select On to let the display enter power saving mode when no signal is detected from the
Component input after three successive cycles. Use the PLUS/MINUS button to make your selection.
Language
Select the language for the OSD menu.
Use the UP/DOWN button to select a language.
Panel saving
Choose to enable the panel saving functions to reduce the risk of the "image persistence”. Use the UP/
DOWN button to toggle between
Brightness - Select On and the brightness of the image will be reduced to an appropriate level, and the
Brightness setting in the Picture menu will become unavailable. Use the PLUS/MINUS button to make
selection.
Pixel shift - Select the time interval for the display to slightly expand the image size and shift the pixel
position in four directions (up, down, left, and right). Use the PLUS/MINUS button to make selection
(Off-900 seconds from current time). The default time interval is 300 seconds. This helps to alleviate the
issues of image sticking.
IMPORTANT: It is not recommended to keep a single static image displayed on your unit for long periods
of time. This can cause image sticking, or ghost imaging, which will decrease the quality of your images. In
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips BDL4771V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips BDL4771V in the language / languages: English as an attachment in your email.

The manual is 7,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info