507409
7
Zoom out
Zoom in
Previous page
1/64
Next page
Never place items on top of the appliance when it is in use.
Automatic shut-off
This ap)pliance is equipped with an electronic shut-off function that automatically switches the
appliance off after 10 minutes, when the sterilising process is nished.

1
Clean all detachable parts (see chapter ‘Cleaning’).
2 Adjust the length of the mains cord by winding part of it round the cord storage brackets in
the base of the appliance.
3 Put the mains plug in the wall socket.
Preparing for use
Filling the water reservoir
1 Remove the container from the base
2 Fill the measuring cup up to the required level (90ml).
Do not use less water than 90ml to prevent the appliance from boiling dry.
3 Pour the water into the water reservoir (onto the heating element). (Fig. 2)
4 Place the container on the base. (Fig. 3)
Using the appliance
Sterilising
1 Clean all objects that have to be sterilised.
2 Make sure that there is enough water in the water reservoir (see chapter ‘Preparing for use’).
3 Place the bottles upside down onto the pins inside the container. (Fig. 4)
The bottle in the middle can be placed on the centre pillar or can be put in the middle without
the centre pillar.
The container can contain 9 large bottles or 6 wide-neck bottles.
The centre pillar can be used for the screw rings. When you use the centre pillar for screw rings,
you can sterilise 8 large bottles or 6 wide-neck bottles.
4 Fill the lower basket and put it on the centre pillar. (Fig. 5)
This is only possible if you have lled the container with small bottles. If you have lled the container
with large bottles, you cannot use the lower basket.
Make sure that the objects inserted in the container do not touch the heating element.
5 Fill the upper basket and place it on the rim of the container. (Fig. 6)
6 Put the lid on the container. (Fig. 7)
7 Press the on/off button. The power-on light goes on to indicate that the appliance is
operating. (Fig. 8)
The sterilising process takes 10 minutes. At the end of this process, the appliance switches off
automatically and the power-on light goes out. Always let the appliance complete the entire 10-
minute sterilising process.
8 Let the appliance cool down for approx. 3 minutes before you remove the lid.
9 Remove the lid.
,
-
-
-
ENGLISH 7
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips-Avent SCF225 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips-Avent SCF225 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info