Manual Philips-Avent SCD525 (page 18 of 204) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

507145

Zoom out

Zoom in

1/204

Why is the connection lost every now and then?

Why are there sound interruptions?

• The baby unit and the parent unit are probably

close to the outer limits of the operating

range. Try a different location or decrease the

distance between the units. Please note that

it takes about 30 seconds each time before a

connection between the units is established.

• You may have placed the parent unit next to a

transmitter or other DECT appliance, such as

a DECT telephone or other 1.8GHz/1.9GHz

baby monitor. Move the parent unit away from

the other appliances until the connection is

re-established.

What happens during a power failure?

• 

it continues to operate during a power failure,

both inside and outside the charger. If there are

batteries in the baby unit, it also continues to

operate during a power failure.

Is my baby monitor secure from eavesdropping

and interference?

• The DECT technology of this baby monitor

guarantees no interference from other

equipment and no eavesdropping.

The operating time of the parent unit is

supposed to be up to 24 hours. Why is

the operating time of my parent unit shorter?

• When the parent unit has been charged for



24 hours. The rechargeable batteries only reach

their full capacity after you have charged and

discharged them at least four times.

• The volume of the parent unit may be set too

high, which causes the parent unit to consume

a lot of energy. Decrease the volume of the

parent unit

• The microphone sensitivity level of the baby

unit may be set too high, which causes the

parent unit to consume a lot of energy.

Decrease the microphone sensitivity level in

the menu of the parent unit.

Why do the non-rechargeable batteries of the

baby unit run low quickly?

• The microphone sensitivity level of the baby

unit may be set too high, which causes the

baby unit to transmit more often. Decrease the

microphone sensitivity level in the menu of the

parent unit.

• The volume on the baby unit may be set too

high, which causes the baby unit to consume a

lot of energy. Decrease the volume of the baby

unit.

• You may have set a maximum room

temperature that is lower than the actual room

temperature or a minimum room temperature

that is higher than the actual room temperature.

The baby unit continues to send data to the

parent unit and therefore uses more power.This

causes the non-rechargeable batteries of the

baby unit to run low quickly.

• Perhaps you have switched on the nightlight. If

you want to use the nightlight, we advise you to

run the baby unit on mains power.

Why does the charging time of the parent unit

exceed 8 hours?

• The parent unit may be switched on during

charging. Switch off the parent unit during charging.

Thespeciedoperatingrangeofthebaby

monitor is 330 metres/1000 feet. Why does my

baby monitor manage a much smaller distance

than that?

• 

open air. Inside your house, the operating range

is limited by the number and type of walls and/

or ceilings in between. Inside the house, the

operating range is up to 50 metres/150 feet.

• The ECO mode is switched on. When you

operate the baby unit in ECO mode, the

operating range is 260 meters/800 feet in open

air. Inside your house, the operating range is

limited by the number and type of walls and/or

ceilings in between. Move the parent unit closer

to the baby unit or switch off the ECO mode.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips-Avent SCD525 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips-Avent SCD525 Manual

Product: