Manual Philips-Avent SCD525 (page 17 of 204) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

507145

Zoom out

Zoom in

1/204

Why does the appliance produce a high-

pitched noise?

• The units may be too close to each other.

Make sure the parent unit and the baby unit

are at least 1 metre/3.5 feet away from

each other.

• The volume of the parent unit may be set too

high. Decrease the volume of the parent unit.

Why don’t I hear a sound/Why can’t I hear

my baby cry?

• The volume of the parent unit may be set

too low or may be switched off. Increase the

volume of the parent unit.

• The microphone sensitivity level of the baby

unit may be set too low. Set the microphone

sensitivity level to a higher level in the menu of

the parent unit.

• The baby unit and the parent unit may be out

of range of each other. Reduce the distance

between the units.

Why does the parent unit react too quickly to

other sounds?

• The baby unit also picks up other sounds than

those of your baby. Move the baby unit closer

to the baby (but observe the minimum distance

of 1 metre/3.5 feet).

• The microphone sensitivity level of the baby

unit may be set too high. Decrease the

microphone sensitivity level in the menu of the

parent unit.

Why does the parent unit react slowly to the

baby’s crying?

• The microphone sensitivity level of the

baby unit may be set too low. Increase the

microphone sensitivity level of in the menu of

the parent unit.

Why does the LINK light on the parent unit

light up red continuously and why is the message

‘Searching’ shown on the display?

• The baby unit and the parent unit are out

of range of each other. Move the parent unit

closer to the baby unit.

• The baby unit may be switched off. Switch on

the baby unit.

• The ECO mode is switched on, but the

operating range is too large. Move the parent

unit closer to the baby unit or switch off the

ECO mode.

Why does the battery light on the baby unit

ashred?

• The non-rechargeable batteries of the baby unit

are running low. Replace the non-rechargeable

batteries or connect the baby unit to the mains

(see chapter ‘Preparing for use’).

Why does the parent unit beep?

• If the parent unit beeps while the LINK light

lights up red continuously and the message

‘Searching’ is shown on the display, the

connection with the baby unit is lost. Move the

parent unit closer to the baby unit.

• If the parent unit beeps and the battery symbol

on the display is empty, the rechargeable

batteries of the parent unit are running low.

Recharge the batteries.

• If you have switched off the volume while

the sound alert is on, the parent unit beeps

whenever the fourth sound level light lights up

because the baby unit has picked up a sound.

• If you have set the room temperature range on

the parent unit and the temperature alert is on,

the parent unit beeps when the temperature

drops below the set level or below 14°C or

when the temperature rises above the set level

or above 35°C.

• The baby unit may be switched off. Switch on

the baby unit.

ENGLISH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips-Avent SCD525 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips-Avent SCD525 Manual

Product: