507145

Philips-Avent SCD525 Manual

13
Zoom out
Zoom in
Previous page
1/204
Next page
13
7.8 Temperature alert on/off
D Note:
You can only switch the temperature alert on and
off in the menu of the parent unit.
D
Note:
If the temperature alert is activated too often,
reduce the set minimum temperature and/or
increase the set maximum temperature (see
‘Setting room temperature range’).
If the temperature alert is switched on, the
parent unit beeps if the actual room temperature
exceeds the set maximum temperature or drops
below the set minimum temperature. In addition,
the backlight of the parent unit display goes on
and ‘High’ or ‘Low’ appears on the display. If no
minimum and maximum temperatures have been
set, the temperature alert is given when the room
temperature drops below 14°C or rises above
35°C.
1 Select ‘Temperature’ with the + and - buttons.
2 
3 Select ‘Alert’ with the + and - buttons.
4 
5 If the alert is off, the display shows ‘On?’. Press
the OK button to switch on the alert. If the
alert is on, the display shows ‘Off?’. Press the
OK button to switch off the alert.
7.9 Setting temperature scale
D Note:
You can only set the temperature scale in the
menu of the parent unit.
You can set the temperature scale either to
Celsius (C) or Fahrenheit (F).
1 Select ‘Settings’ with the + and - buttons.
2 
3 Select ‘Temp scale’ with the + and - buttons.
4 
5 Select ‘Celsius’ or ‘Fahrenheit’ with the +
and - buttons.
7.7 Setting room temperature
range
D Note:
You can only adjust the temperature range in the
menu of the parent unit.
A baby will sleep comfortably in a room heated
to a temperature between 16°C and 20°C. This is
important, since a baby cannot regulate its body
temperature as well as an adult. A baby needs
more time to adjust to temperature changes.
If you do not set a temperature range, the baby
monitor alerts you when the temperature in your
baby’s room drops below 14°C or rises above
35°C. In this case, the backlight of the parent unit
display goes on and ‘High’ or ‘Low’ appears on
the display. To change the default minimum and
maximum temperature, follow the instructions
below.
D
Note:
The temperature of the baby’s room is shown
on the display of the parent unit when they are
linked.
1 Select ‘Temperature’ with the + and - buttons.
2 
3 Select ‘Range’ with the + and - buttons.
4 
5 Set the desired minimum temperature with
the + and - buttons.
6 
7 Set the desired maximum temperature with
the + and - buttons.
8 
• The message ‘Saved’ appears on the display.
ENGLISH
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips-Avent SCD525 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips-Avent SCD525 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info