507145

Philips-Avent SCD525 Manual

11
Zoom out
Zoom in
Previous page
1/204
Next page
11
In the ECO mode, the appliance consumes
less energy, but still ensures that you can always
hear your baby clearly without any distracting
noise. Using the baby monitor in the ECO mode
helps you to preserve the environment.
D
Note:
The operating range of the baby monitor when
it is operated in the ECO mode is 260 meters
in open air. Depending on the surroundings and
other factor that may cause interference, this
range may be smaller.
1 Select ‘ECO mode’ with the + and -
buttons (Fig. 29).
2 
3 If the ECO mode is off, the display shows
‘On?’. Press the OK button to switch on
the ECO mode. If the ECO mode is on, the
display shows ‘Off?’. Press the OK button to
switch off the ECO mode.
• If you have set the ECO mode to ‘on’, the
parent unit switches off and on again. The
ECO mode symbol appears on the display
of the baby unit and the parent unit to
indicate that both units now operate in ECO
mode.
D
Note:
The connection between parent and baby
unit may be lost when the ECO mode is
switched on. If this happens, the operating
range may be too large for the ECO mode. In
this case, either reduce the operating range or
switch off the ECO mode.
7.3 Nightlight on/off
1 Select ‘Light’ with the + and - buttons.
2 
3 If the nightlight is off, the display shows
‘On?’. Press the OK button to switch on the
nightlight. If the nightlight is on, the display
shows ‘Off?’. Press the OK button to switch off
the nightlight.
7 Menu options
All functions can be operated on the parent unit,
but some functions can also be operated on the
baby unit.
7.1 Menu operation - general
explanation
D Note:
Menu functions can only be operated when a
connection has been established between the
baby unit and the parent unit.
1 Press the MENU button to open the
menu (Fig. 28).
• The rst menu option appears on the
display.
2 Use the – and + buttons to select the desired
menu option (Fig. 29).
D
Note:
The arrow indicates in which direction you
can navigate.
3 
4 Use the + and - buttons to select the desired
setting.
5 
• The new setting ashes once. The message
‘saved’ also ashes once and then
disappears from the display.
6 Press the MENU button again to exit the
menu.
7.2 ECO mode
D Note:
You can only switch the ECO mode on and off
in the menu of the parent unit.
You can use the ECO mode to reduce the energy
consumption of the appliance. Monitoring your
baby from a small distance requires less
transmission power and less electrical power
than monitoring your baby from a large distance.
When you monitor your baby from a small
distance, you can activate the ECO mode.
ENGLISH
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips-Avent SCD525 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips-Avent SCD525 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info