Manual Philips 9100 Serie (page 9 of 88) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

451012

Zoom out

Zoom in

1/88



1 Switch off the appliance (1) and unplug it (2) (Fig. 21).

- Press the cord rewind button to store the cord.

- Empty the Calc Clean tank if it is lled.

2 Wind the supply hose round the bottom of the steam generator (Fig. 22).

Note: Make sure the supply hose sits properly in the storage groove and inside the bracket.

3 Place the heat-resistant iron resting mat on the steam generator and put the iron on the

mat (Fig. 23).

Note: You do not have to wait for the appliance to cool down. You can store the appliance immediately

after use.

4 Slide the carry lock slide to the right to lock the iron onto the steam generator (Fig. 24).

5 With one hand, you can now easily carry the whole appliance by the handle of the

iron (Fig. 25).



This chapter summarises the most common problems you could encounter with the appliance. If

you are unable to solve the problem with the information below, please contact the Philips

Consumer Care Centre in your country.

Problem Possible cause and solution

The appliance does

not become hot.

There is a connection problem. Check the mains cord, the plug and the

wall socket.

The appliance has not been switched on. Set the on/off knob to ‘on’.

The set temperature is too low. Set a higher temperature.

Smoke comes out of

my new ironing

system when I switch

it on.

Some parts of the appliance have been lightly greased in the factory and

may initially give off some smoke when heated. This phenomenon is

perfectly normal and ceases after a short while

The appliance does

not produce any

steam.

There is not enough water in the water tank. Fill the water tank.

The steam generator has not heated up sufciently. Wait approx. 2

minutes.

The set ironing temperature is too low for steam ironing. Select a

temperature of 2 or higher.

The water tank is not placed properly in the steam generator. Place the

water tank properly in the steam generator (‘click’).

When the temperature dial is set to a very high temperature, the steam

produced is dry and hardly visible. It is even less visible when the

ambient temperature is relatively high and it is entirely invisible when the

temperature is set to MAX. Set the temperature dial to a lower

temperature, e.g. 2, to check if the iron produces steam.

 9

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips 9100 Serie in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips 9100 Serie Manual

Product: