Manual Philips 9100 Serie (page 8 of 88) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

451012

Zoom out

Zoom in

1/88

- The steam light ashes to indicate that the steam generator is heating up. After 2 minutes the

appliance is ready for use. You hear two beeps, the steam light stops ashing and stays on. Press

the steam trigger for steam.

- To remove stubborn creases, you can use the steam boost function. Set the temperature dial

between 3 and MAX. Press the steam boost button.

Never direct the steam at people.

9 Press the steam button to select the desired steam setting (Fig. 13).

- High setting for high steam output (set a temperature from 3 to MAX)

- Medium setting for moderate steam output (set a temperature from 3 to MAX)

- ECO setting for environment-friendly steam output (set a temperature from 2 to MAX).

Note: If you do not use the iron for more than 10 minutes, the appliance switches off automatically for

safety reasons. The automatic shut-off light ashes. To switch on the appliance again, press any

button (Fig. 14).



This appliance is equipped with an Auto Calc Clean function. Over time, scale particles build up

inside the steam generator. The appliance automatically performs a Calc Clean process to clean itself

from scale after using 6 to 8 tanks of water.

1 When the Auto Calc Clean process takes place, the Auto Calc Clean light ashes and you

hear short beeps. (Fig. 15)

- Wait approximately 2 minutes for the appliance to complete the process.

- During this process, the appliance occasionally produces pumping and clicking sounds.

2 When the Auto Calc Clean process is completed, the Auto Calc Clean light goes off.

, The Calc Clean tank light ashes (Fig. 16).

3 Remove the water tank (Fig. 17).

- Press the Calc Clean tank emptying button and empty the Calc Clean tank into the sink.

4 Rell the water tank and reattach it to the steam generator (Fig. 18).

- The Auto Calc Clean process is now nished and you can start ironing when the steam light is

on continuously.

Note: If you do not empty the Calc Clean tank, the tank will overow during the next Auto Calc Clean

process.



The Auto Calc Clean system keeps the appliance sufciently clean. Hovewer, you can also perform

the Calc Clean process manually for additional cleaning.

1 Fill the water tank to the maximum level (Fig. 19).

2 Put the mains plug in an earthed wall socket (Fig. 11).

3 To start the Calc Clean process manually, keep the middle steam selection button pressed

while switching on the appliance at the same time. Release the steam selection button only

when the blue Auto Calc Clean light ashes (Fig. 20).

4 Follow steps 1-4 of the Auto Calc Clean process described above.

Note: The manual Calc Clean process can only be activated if the appliance is sufciently cold. If the

appliance is too hot for the manual Calc Clean process, the steam selection button ashes and the

appliance continues to heat up for use.

8

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips 9100 Serie in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips 9100 Serie Manual

Product: