22
This system remote control operates the following Philips equipment:TV,VCR, DVD,
DVD/R, SAT (RC5/RC6), AMP (+TUNER), CD, CD/R.
Press the
Select key to operate any of the equipment indicated in the display (AUX =
CD;
DVD/R = DVD, SAT = SAT (RC5).Another device can be selected by pressing
Select repeatedly within 2 seconds.The led will blink slowly to indicate the device.
Press one of the keys on the remote control to operate the peripheral equipment.
To return to TV mode press
Select while the led is blinking.
When no action is taken within 60 seconds, the remote goes back to
TV mode.
When you do not want the remote to go back to TV mode, and to stay in the mode
selected, proceed as follows:
Select the desired mode with the
Select key.Wait until no LED is lit. Press the Select
key again simultaneously with the OK key for at least 2 seconds.The remote will not go
back to TV mode from now on and will remain in the mode selected.
To go back to the default setting of the remote (TV mode) repeat what is explained
above, selecting the TV mode.
Note: When the Select key is pressed and held for more than 2 seconds, the RC5/RC6 system
select command is transmitted.
B to switch to standby
ºæ for pause (
VCR, DVD, CD)
RDS news/TA (AMP);
to shuffle play (
CD/R)
® for record
Ò for rewind (
VCR, CD);
search down (
DVD, AMP)
‡ for stop
π for play
† for fast forward (
VCR, CD);
search up (
DVD, AMP)
S for pause (
CD/R)
b RDS display (
AMP);
to select your choice of subtitle
language (
DVD);
i display information
MENU to switch the menu on or off
- P + for chapter, channel, track
selection
0 to 9 digit entry
0 tape index (
VCR),
select a DVD title/chapter,
select a frequency (
AMP)
cursor up/down
to select the next or the previous
disc (
CD)
cursor left/right
to select the previous or
following track (
CD)
search up/down (
AMP)
Additionally the DVD/R, SAT and AUX indicator can be programmed to operate the
DVD-R, DVD + receiver, DVD-R + receiver, SAT (RC6), CD-R and VCR instead.
& Select TV with the Select key.
é To program
• DVD-R, press the OK key + digit 2;
• SAT (RC6), press the OK key + digit 4;
•
CD-R, press the OK key + digit 6;
•
DVD + receiver, press the OK key + digit 7;
• DVD-R + receiver, press the OK key + digit 8;
•
VCR, press the OK key + digit 9.
“ Select the corresponding DVD/R, SAT, AUX indicator.The remote control will
operate your DVD-R, DVD or DVD-R in combination with a receiver (
DVD/R),
SAT (RC6) (
SAT), CD-R or VCR (AUX).
Note:To return to the modes programmed in the factory, either remove the batteries for a
few minutes, or press the
OK key + digit 1 (DVD mode); or + digit 3 (SAT-RC5) or + digit
5 (CD mode).
Audio- and video equipment keys