479064
28
Zoom out
Zoom in
Previous page
1/40
Next page
4
Cause:
Remedy:
5.
Machine
feeds
irregularly
or
not
at
all
Lint
has
accumulated
between
tooth
rows
of
feed
dog.
Feed
dog
dropped.
(Drop-feed
control
is
at
right.)
6.
Machine
runs
with
difficulty
Thread
ends
in
hook
raceway.
7.
Electronic
bobbin
thread
monitor
does
Thread
ends
and
dirt
have
collected
in
the
free
arm
cover
over
the
indicator
lamp,
n
the
hook
raceway,
in
the
bobbin
case,
behind
the
hook
and
on
the
second
indicator
lamp
to
the
right
behind
the
hook.
Remove
needle
plate
and
clean
out
lint.
Flick
drop-feed
control
to
the
left.
Remove
thread
ends
and
put
a
drop
of
oil
into
hook
raceway.
not
function
Remove
thread
ends
and
dirt.
Special
care
should
be
taken
in
the
area
round
the
second
indicator
lamp.
8.
The
machine
only
sews
slowly,
the
needle
has
no
piercing
power
and
the
electronic
system
is
not
functioning
The
bobbin
winder
is
engaged:
it
is
at
the
Move
the
winder
to
the
left
(switch
off)
right.
9.
The
machine
sews
only
one
stitch
The
machine
is
set
for
basting.
Take
foot
from
foot
control
and
press
button
50.
r
10.
The
sewing
lamp
lights
up
and
the
machine
is
not
running
Fuse
is
faulty.
Insert
ne’N
fuse.
25
28


Need help? Post your question in this forum.

Forumrules
1

Forum

pfaff-tiptronic-1029

Reset search

  • HI, can someone please help with steps of how to rethread the bobbin using the pfaff tiptornic 1029 model? Thanks in advance Submitted on 24-8-2020 at 01:20

    Reply Report abuse
    • On the right side of the machine you can put the empty bobbin on the little black hole and then slide it to the right with the machine threaded you can take the thread and loop it around the little silver button on the left side of the bobbin holding tray and then put the thread down into your bobbin. on the turn wheel on the right turn the centre knob so it disconnects the needle from going up And down then just press the foot pedal and it will fill the bobbin Answered on 17-9-2021 at 20:45

      Vote up Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Tiptronic 1029 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Tiptronic 1029 in the language / languages: English as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Tiptronic 1029

Pfaff Tiptronic 1029 User Manual - German - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info