479064

Pfaff Tiptronic 1029 Manual

27
Zoom out
Zoom in
Previous page
1/40
Next page
6
1.
Machine
skips
stitches
Needle
not
rserted
correctly.
Wrong
needle
used.
Needle
bent
or
blunt.
Machine
threaded
improperly.
Needle
too
thin
for
thread
used.
2.
Needle
thread
breaks
For
any
of
the
above
reasons.
Thread
tension
too
strong.
Poor-quality
or
knotty
thread
used,
or
thread
that
has
become
too
dry
by
excessive
storage.
3.
Needle
breaks
Needle
not
pushed
up
as
far
as
it
will
go.
Needle
bent.
Needle
too
thin
or
too
thick.
Needle
bent
and
strikes
needle
plate
because
work
is
pushed
or
pulled.
Bobbin
case
improperly
inserted.
4.
Seam
is
not
uniform
Tension
Out
of
adjustment.
Thread
too
thick,
knotty
or
hard.
Bobbin
thread
wound
unevenly.
Push
needle
up
as
far
as
it
will
go,
its
flat
shank
side
facing
toward
the
back.
Insert
system
130/705
H
needle.
Insert
new
needle.
Check
threading.
Select
needle
according
to
Needle
and
Thread
Chart.
See
par.
1
above.
Regulate
thred
tensions
Used
only
good-quality
thread.
Insert
new
needle
and
push
it
up
as
far
as
it
will
go.
Insert
new
needle.
See
Needle
and
Thread
Chart
Let
nachine
feed
the
work
alone.
Only
guide
the
material
lightly.
When
inserting
the
bobbin
case,
press
against
it
until
it
snaps
into
place.
Check
upper
and
lower
tensions.
Use
first-class
thread
only.
During
bobbin
winding,
do
not
hold
tnread
in
hand,
but
pass
it
through
the
bobbin
tension
stud.
Thread
machine
properly
and
check
both
tensions.
Trouble
shooting
Cause:
Remedy:
Kinks
appear
on
top
and
bottom
of
material.
24
… 27 …


Need help? Post your question in this forum.

Forumrules
1

Forum

pfaff-tiptronic-1029

Reset search

  • HI, can someone please help with steps of how to rethread the bobbin using the pfaff tiptornic 1029 model? Thanks in advance Submitted on 24-8-2020 at 01:20

    Reply Report abuse

    • On the right side of the machine you can put the empty bobbin on the little black hole and then slide it to the right with the machine threaded you can take the thread and loop it around the little silver button on the left side of the bobbin holding tray and then put the thread down into your bobbin. on the turn wheel on the right turn the centre knob so it disconnects the needle from going up And down then just press the foot pedal and it will fill the bobbin Answered on 17-9-2021 at 20:45

      Vote up Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Tiptronic 1029 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Tiptronic 1029 in the language / languages: English as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Tiptronic 1029

Pfaff Tiptronic 1029 User Manual - German - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info