478148
47
Zoom out
Zoom in
Previous page
1/52
Next page
4:4
Maintenance
Problem/Cause Remedy
The machine does not feed or feeds irregularly
Sewing lint has collected between the feed dog teeth
rows.
Remove needle plate, remove lint with brush.
Feed dog is lowered. Push slide B to the left.
Slide B is at the right (see page 2:20) Push slide B to the left.
The needle plate is not lying Á at. Press downwards at the front of the needle plate until you
hear it snap into place.
The machine is running with difÀ culty
There are thread remnants in the hook ways. Remove the threads.
The machine does not sew the selected stitch
Switch off the machine, wait 10 seconds and switch on again. Select the desired stitch again. Before changing presser feet
and needle the main switch must be switched off. Do not attempt to sew without fabric under the presser foot. When
leaving the machine, even for only a short time, switch off the main switch. This is important if there are any children
nearby.
Display incorrect or no display
When static electricity is being discharged some segments
of the display will fail.
Switch off the machine on completion of the sewing operation
and then turn it back on again after approx. 10 seconds. All
segments must appear again on the display. Select the desired
stitch again
Non-original Parts and Accessories
The warranty does not cover any defect or damage caused
by use of non-original accessories or parts.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff ClassicStyle 2029 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff ClassicStyle 2029 in the language / languages: English as an attachment in your email.

The manual is 1,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info