478148
46
Zoom out
Zoom in
Previous page
1/52
Next page
4:3
Maintenance
Problem/Cause Remedy
The machine skips stitches
The needle is not properly inserted. Push needle fully upwards. Flat side facing the back.
Wrong needle is in use. Use needle system 130/705 H.
Needle is bent or blunt. Insert a new needle.
The machine is not properly threaded. Check how the machine is threaded.
Needle is too small for thread. Use a larger needle.
Needle thread breaks
See reasons above. See above.
Thread tension is too tight. Adjust thread tension.
Thread is poor or has slubs in it, or has become dry after
overlong storage
Only use good quality threads.
Thread is too thick. Use needle with large eye (system 130 N).
Needle breaks off
Needle is not pushed fully in. Insert new needle and push fully in.
Needle is bent Insert different type of needle.
Needle is too thick or too thin. Insert different type of needle.
Needle is bent, and has hit the needle plate because you
are pulling or pushing the fabric.
Only guide the fabric lightly.
The bobbin case is not properly inserted. When you insert the bobbin case, push it fully into the stop.
Pull lightly on the end of the thread to make sure bobbin case
is secure.
The seam is sewn unevenly
The tension needs adjusting. Check needle thread tension.
Thread is too thick, stubbed or hard. Only use good quality threads.
The bobbin thread is unevenly wound. Do not wind thread by hand. Make sure thread is pulled
solidly into bobbin tension spring. Check bobbin threading
path.
Thread loops at top or underside of fabric. Re-thread machine, making sure presser foot is raised to its
highest position. This ensures that needle thread is securely
in thread tension system.
Sewing problems and their solutions
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff ClassicStyle 2029 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff ClassicStyle 2029 in the language / languages: English as an attachment in your email.

The manual is 1,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info