750005
35
Zoom out
Zoom in
Previous page
1/44
Next page
Sewing Mode
Blindhem Stitch
The blindhem stitch is used to make invisible hems on
skirts, trousers and home décor projects. Use foot
number 3 with the IDT™ system.
1. Finish the edge of the hem.
2. Fold and press the hem allowance to the wrong side.
3. Fold the hem back on itself so approximately 3/8" (1
cm) of the finished edge extends beyond the fold.
The wrong side of your project should now be facing
up.
4. Place the fabric under the presser foot so that the
fold runs along edge guide (A).
5. When the needle swings into the fold it should catch
a small amount of fabric. If the stitches are visible on
the right side, adjust edge guide (A) by turning
adjusting screw (B) until the stitch that catches the
hem just barely shows.
Elastic Blindhem Stitch
To the left: blindhem stitch.
To the right: elastic blindhem stitch.
The elastic blindhem stitch is especially suitable for
stretchy fabrics, because the zigzag in the stitch lets the
stitch stretch. The hem is finished and sewn at the same
time. There is no need to finish the raw edge first on
most knits.
Sewing in Zippers
There are different ways to sew in zippers. Follow the
directions included with your pattern for best results.
For all types of zippers it is important to sew close to the
teeth of the zipper. The zipper foot 4 can be snapped to
the presser foot bar on the left or right, depending on
how you will insert your zipper. Then set the stitch
position so that it enters close to the edge of the zipper
teeth by using one of the 29 needle positions available
for the straight stitch. If the presser foot is attached on
the right side, the needle must only be moved to the
right. If the foot is attached on the left, the needle must
only be moved to the left.
35
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Ambition 610 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Ambition 610 in the language / languages: English as an attachment in your email.

The manual is 4,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Ambition 610

Pfaff Ambition 610 User Manual - German - 48 pages

Pfaff Ambition 610 User Manual - Dutch - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info