750005
33
Zoom out
Zoom in
Previous page
1/44
Next page
Sewing Mode
Darning
Darning a small hole or a tear before it becomes larger
can save a garment. Choose a lightweight thread in a
color as close to your garment as possible.
1. Place fabric or stabilizer in position under the hole or
tear in your garment.
2. Select a darning stitch.
3. Start sewing above the hole and over it.
4. Once you have sewn across the hole, press the
reverse button to set the length of the stitch. Your
sewing machine will automatically complete the
stitch.
5. By default, the machine will be set to repeat the
same size darning square, just continue sewing.
Re-select the darning stitch to deactivate repeat.
Note: The reverse button icon (1) will disappear, indicating
that repeat is activated.
Sewing Hems in Heavy Fabric
When sewing over seams in extra heavy fabric or a blue
jeans hem, the foot can tip as the machine climbs over
the seam. Use the multi-purpose tool to balance the
height of the presser foot as you sew. One side of the
multi-purpose tool is thicker than the other. Use the side
that suits the thickness of the seam best.
Engage the IDT™ system, see page 20. At the thickest
point on the fabric, slow down the sewing speed.
Note: Increasing the stitch length may improve the sewing
result when sewing hems in heavy fabric.
Handlook Quilting
28 29 30 31
Recommended stitches for a handlook quilt
A quilt usually consists of three layers, two layers of
fabric with a layer of batting sandwiched between.
1. Baste the completed quilt top to the batting and
backing.
2. Thread the needle with an invisible (monofilament)
thread. Use needle size 90 and lightweight, soft
cotton (60 wt or lighter) thread in the bobbin.
3. Select a quilt stitch and snap on the recommended
foot shown in the sewing recommendations view.
4. Engage the IDT™ system.
5. When you sew the stitch you should only see your
bobbin thread. You might need to adjust the thread
tension depending on which fabric, thread and
batting that is used. Make a few tests on a scrap
piece of the fabric you are going to sew and check
the tension.
33
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Ambition 610 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Ambition 610 in the language / languages: English as an attachment in your email.

The manual is 4,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Ambition 610

Pfaff Ambition 610 User Manual - German - 48 pages

Pfaff Ambition 610 User Manual - Dutch - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info