750005
24
Zoom out
Zoom in
Previous page
1/44
Next page
Preparations
Buttons and Indicators
1. Needle stop up/down button with
indicator
2. Tie-off button with indicator (4)
3. Indicator for reverse (6)
4. Indicator for tie-off (2)
5. Start/stop button
6. Reverse button with indicator (3)
7. Mirror side to side button
8. Alt button
9. Info button
10. Settings menu button
11. Graphic display
12. Stitch width/stitch positioning
buttons
13. Stitch length/stitch density buttons
14. Direct selection buttons
15. Wheel buttons
16. OK button
17. Speed control lever
Graphic Display
The graphic display lets you view all your selections and
options. Stitches are shown in real size (except for
buttonholes).
Needle Stop Up/Down Button with
Indicator
Press this button to move the needle up or down. The
setting of the needle stop position is changed at the same
time. When needle down is activated, the indicator is lit,
the needle will stop in the down position. You can also
tap the foot control to raise or lower the needle.
Tie-off Button with Indicator
Press the tie-off button while sewing and your machine
immediately sews a few tie-off stitches and stops
automatically.
To set the machine to perform tie-off at the end of a
stitch, press the button before starting to sew. The
indicator becomes lit. After sewing the desired length of
stitching, press the reverse button while actively sewing.
The machine will complete the current stitch, tie-off and
stop automatically.
To sew only one repetition of a stitch, press first the tie-
off button and then the reverse button before starting to
sew. The indicators become lit. The machine will sew the
selected stitch once, tie-off and stop automatically.
Note: The tie-off function is not available for stitches 18-26.
Start/Stop Button
Press this button to start or stop the machine without
using the foot control. Press the button once to start and
press it again to stop.
Reverse Button with Indicator
For permanent reverse, press the button before starting
to sew. The reverse indicator will be lit and the machine
sews in reverse until you press the button again to cancel.
If you press the reverse button while sewing, the
machine sews in reverse for as long as you keep the
24
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Ambition 610 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Ambition 610 in the language / languages: English as an attachment in your email.

The manual is 4,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Ambition 610

Pfaff Ambition 610 User Manual - German - 48 pages

Pfaff Ambition 610 User Manual - Dutch - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info