750005
22
Zoom out
Zoom in
Previous page
1/44
Next page
Preparations
Changing the Needle
1. Use the hole in the multi-purpose tool to hold the
needle.
2. Loosen the needle screw. Use the screw driver if
necessary.
3. Remove the needle.
4. Insert the new needle, using the multi-purpose tool.
Push the new needle upwards with the flat side
away from you until it will go no further.
5. Tighten the needle screw as tight as it will go.
Lowering Feed Dogs
You can lower the feed dogs by moving the switch at
the back of the free arm to the left. Move the switch to
the right if you wish to raise the feed dogs.
Presser Foot Pressure
The presser foot pressure has been pre-set to the
standard value ”N”. In most cases, you do not need to
adjust the presser foot pressure. For specialty techniques,
or when sewing on very light or heavy fabric, adjusting
the pressure can improve the result. For very light
fabrics, turn the dial to a lower number. For heavy fabric,
turn the dial to a higher number.
Presser Foot Lift
The presser foot is lowered or raised with the presser
foot lift (A). If you are sewing on heavy fabric or several
layers of fabric, the presser foot can be raised higher (B)
to make it easier to place the fabric underneath the
presser foot.
Note: The machine will not start when the presser foot is
raised (except for bobbin winding).
22
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Ambition 610 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Ambition 610 in the language / languages: English as an attachment in your email.

The manual is 4,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Ambition 610

Pfaff Ambition 610 User Manual - German - 48 pages

Pfaff Ambition 610 User Manual - Dutch - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info