750008
11
Zoom out
Zoom in
Previous page
1/44
Next page
A
B
EC D
A
B
C
D
E
F
A
C
B
ABOUT YOUR MACHINE – 11
Upper Cutter
Turn off the main power switch and unplug the machine.
Deactivate the Upper Cutter
Deactivate the upper cutter for atlock, pintucking, etc.
Turn the handwheel toward you until the upper cut-
ter (A) is raised to the highest position.
Open the front cover.
Push the the movable cutter knob (B) towards the co-
ver (C). While pressed, turn the knob clockwise until
the cutter clicks into the locked position (D).
Reactivate the Moveable Upper Cutter
Open the front cover.
Push the movable cutter knob towards the cover (C).
While pressed, turn the knob clockwise until the cut-
ter is activated again (E).
Upper view of the
upper looper
Rear view of the
upper looper
2-thread Overlock Converter
Turn off the main power switch and unplug the machine.
Engaging
2-thread overlock stitches are sewn using one needle thread
and the lower looper thread. Before sewing, the 2-thread
overlock converter must be attached to the upper looper.
Open the front cover.
Raise the needle.
Insert the pin of the needle holder into the small hole
(A) of the 2-thread overlock converter (B).
Turn the 2-thread overlock converter counter-clockwise
until its hook matches the tip of the upper looper (C).
(Make sure that the needle holder does not touch the up-
per knife).
Carfully push the 2-thread overlock converter backwards
so that the hook (D) goes behind the bulge (E) of the up-
per looper and into the hole (F).
2-thread overlock converter
engaged
Disengaging
Insert the pin of the needle holder into the small hole in
the 2-thread overlock converter (A).
Carefully push the 2-thread overlock converter backwards
(B) and turn it clockwise until the hook comes over the
bulge.
Turn the 2-thread overlock converter until it clicks into
the original position (C).
Remove the needle holder from the 2-thread overlock con-
verter.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Admire Air 5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Admire Air 5000 in the language / languages: English as an attachment in your email.

The manual is 7,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Admire Air 5000

Pfaff Admire Air 5000 User Manual - German - 44 pages

Pfaff Admire Air 5000 User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info