750008
10
Zoom out
Zoom in
Previous page
1/44
Next page
A
B
C
D E
10 – ABOUT YOUR MACHINE
Needle Information
Use HA-1 SP #14 or #11 needles or system Stretch 130/705 H-S, size #11/75 or #14/90.
HA-1 SP #11 needles are set on the machine.
You can sew using one or two needles depending on what stitch to use. The left needle and needle clamp screw are
marked “L”, the right needle and needle clamp screw are marked “R”.
Note: When using both needles, the left needle is positioned a little higher up than the right needle (they are not supposed to be ‘level’,
like a twin needle).
Changing the Needles
Turn off the main power switch and unplug the machine.
Turn the handwheel toward you until the needles are
at the highest position.
Insert the needle attached to the machine into the hole
of the needle holder (A).
Loosen, but do not remove the needle clamp screw (B)
with the small screwdriver.
Remove the selected needle.
Note: When using only one needle, slightly tighten the other
needle clamp screw. This is to prevent loosing the needle clamp
screw.
Insert a new needle into the needle holder with the
flat side to the rear (C).
Insert the needle into the needle clamp as far as it will
go. The top of the left needle should touch the edge
of the needle bar (D) and the top of the right needle
should touch the bottom of the needle bar (E).
Securely tighten the needle clamp screw using the
small screw driver.
Pull the needle holder down to remove it from the
needle.
Note: Do not over-tighten the screw as this may cause the nee-
dle clamp to be damaged.
Checking the Needle
To make sure the needle is not bent, place the at side of
the needle onto something flat (needle plate, glass etc.).
The gap between the needle and the at surface should be
consistent. Never use a bent or blunt needle.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Admire Air 5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Admire Air 5000 in the language / languages: English as an attachment in your email.

The manual is 7,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Admire Air 5000

Pfaff Admire Air 5000 User Manual - German - 44 pages

Pfaff Admire Air 5000 User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info