478674
12
Zoom out
Zoom in
Previous page
1/15
Next page
material
remove the
needle
plate
and
thoroughly
thread
used
change
the
needle
or
the
thread
to
give
clean
the
feed
dog.
the
correct
relation
between
the
two;
(see
page
5:
“Re-
7.
The
bobbin
case
has
developed
a
rough
edge,
causing
lative
Needle
and
Thread
Sizes”).
the
thread
to
break
remove
the
case
and
consult
a
4.
The
thread
curls,
because
it
is
unsuitable
for
machine
sewing machine
specialist.
sewing
use
a
different
thread.
5.
The
needle
used
is
not
of
the
correct
system
obtain
The
under
thread
breaks
correct
needles
from
the
suppliers
of
your
machine.
1.
Inferior
quality,
knotty
sewing
thread
breaks
easily
use a
better
quality.
The
needle
breaks
2.
The
bobbin
thread
tension
is
too
severe
loosen
the
1.
The
needle
is
wrongly
inserted
reset
the
needle.
tension
screw
(see
page
12:
“Regulating
the
Thread
The
needle
isbentorblunt
change
the
needle
(see
p.6:
Tensions”).
“Inserting
the
Needle”).
3.
The
bobbin
thread
tension
is
too
weak
tighten
the
2.
The
needle
used
is
too
fine
for
the
thread
or
material
screw
with
a
screwdriver
(see
page
12:
“Regulating
the
use
a
thicker
needle;
(see
page
5:
“Relative
Needle
and
Thread
Sizes”).
Thread
Tensions”).
3.
The
upper
thread
tension
is
too
severe
loosen
the
setting
flange
on
tensioner;
(see
page
12:
“Regulating
Stitches
are
missed
the
Thread
Tensions”).
1.
The
needle
has not
been
set
high
enough
change
the
needle,
(see
page
6:
“Inserting the
Needle”>.
Faulty
feeding
2.
The
needle
is
bent
or
blunt
change
the
needle.
1.
Thread
ends
or
dirt
are
interfering
with
the
free
move
3.
The
needle
selected
is
too
fine
or
too
thick
for
the
ment
of
the
feed
dog,
resulting
in
bad
feeding
of
the
20
21
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff 132 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff 132 in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info