771318
13
Zoom out
Zoom in
Previous page
1/20
Next page
www.petsafe.net 13
Maximizing Litter Tray Life
Here are some tips to help get the most life from the Disposable Crystal Litter Tray.
ScoopFree® Disposable Litter Trays work best if placed AWAY from areas of high humidity such as bathrooms,
showers, and basements. Moisture in the air can shorten the life of the crystal litter and disposable tray. Place in a
room with moving air to pull away moisture, such as a room with a fan.
• Cats with diets high in crude fiber and ash content will produce more solid waste. This may prematurely fill the waste
trap. Consider changing the cat’s diet to a food with no byproducts or fillers.
• Increased elimination habits of older cats and cats with diabetes, kidney and thyroid problems may result in a shorter
tray life.
Stirring litter crystals once a week may help the tray life for cats that are ill or have a high urine output. Stirring will
also distribute saturated crystals, which will also help with cats consistently urinate in the same spot or do not dig. Be
sure to mix in the crystal litter from behind the rake and along the sides of the litter box. DO NOT mix in litter from
under the waste trap.
• Kittens are not as developed so their solid waste can be runny. Kittens will go through litter trays faster than adult
cats. It is recommended to use ScoopFree with cats that are older than 6 months.
If your kitten is under 6 months of age, leave the unit UNPLUGGED and scoop waste until kitten is 6
months old.
Care and Cleaning
The ScoopFree Self-Cleaning Litter Box seldom needs cleaned because of its revolutionary design. Surfaces that
would normally become soiled are discarded with each Disposable Crystal Litter Tray. However, you may occasionally
choose to clean the litter box.
Do not submerge or expose the electrical components to water or cleaning solutions.
Always unplug the unit when not in use, before putting on or taking o parts, and before cleaning.
To Clean:
1. Unplug power adapter from wall outlet and disconnect from the litter box.
2. Lift and remove the litter box frame from the crystal litter tray.
3. Remove waste trap cover by tilting it outwards until the side posts fall out of
the slots on the front of the litter box frame.
4. Wipe all surfaces on the litter box frame with a cloth or sponge using mild
soap and water. Wipe rake with sponge or soft brush. DO NOT use bleach
or chemicals to clean as they can act as a repellent to your cat.
5. Clean the Detection Sensors on the interior sides of the litter box frame to
make sure they are not blocked.
6. Thoroughly dry all parts before reassembling the litter box.
To Reassemble:
1. Install the waste trap cover by sliding the posts on the side of the cover into
the slots on the front of the litter box frame.
2. Install the litter tray (see “Litter Tray Installation” page 8).
Detection
Sensor
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Petsafe ZAL00-16409 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Petsafe ZAL00-16409 in the language / languages: English as an attachment in your email.

The manual is 2.42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info