770982
8
Zoom out
Zoom in
Previous page
1/28
Next page
81-800-732-2677
1. Find a place to install the surge protector and
transmitter. There are a few things to consider
when choosing an outlet for your surge protector
and transmitter:
We recommend using an outlet at least 30 ft. from
the breaker box.
Both the surge protector and transmitter should be
indoors, in a dry, ventilated and protected area
(2A, 2B).
The boundary wire must run from the transmitter
and exit the building, so place the transmitter near
a window or a wall that you can drill through (2A).
The temperatures in that location should not fall
below -10°F/-2C or above 104°F/40°C.
Both the surge protector and transmitter should
be at least 3 ft. from large metal objects or
appliances (2C). These items may interfere with the
signal consistency.
To prevent fires and electrical hazards, install
the fence transmitter in buildings that are in
accordance with state and local electrical codes.
2. Once you have chosen an outlet and before
plugging anything in, go to your breaker box and
turn the power off to that outlet.
3. Then, back at the outlet, remove the center screw
that holds the outlet cover in place.
4. Plug the surge protector into the lower outlet.
5. Using the large screw provided, secure the surge
protector to the outlet.
6. At the breaker box, turn the power back on to
the outlet.
7. Next, you will mount the transmitter somewhere
within 5 ft. of the surge protector.
8. Secure the transmitter to a stationary surface using
appropriate mounting hardware (not included). A
mounting template is included on the back of the
product manual.
9. How to connect all the wires will be explained
later in Step 5.
3 ft.
3 ft.
2A
2B
2C
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Petsafe PUL-275 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Petsafe PUL-275 in the language / languages: English as an attachment in your email.

The manual is 3.06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info