770990
6
Zoom out
Zoom in
Previous page
1/24
Next page
1-800-732-26776
B
O
U
N
D
A
R
Y
Z
O
N
E
Transmitter Pet Area
Note: In many
neighborhoods,
nearby property line
may limit how large
the Pet Area can be.
Maximum
90 ft. range
(45 average steps)
How the System Works
The PetSafe® Free to Roam Wireless Fence system has been proven safe, comfortable, and effective for pets over 5 pounds. The system works
by transmitting a radio signal up to 90 feet in all directions. You temporarily define the Pet Area with Boundary Flags for a visual aid in training
your pet. Your pet wears a Receiver Collar with Contact Points that touch his neck, and, once trained, is allowed to roam freely in the Pet Area.
When your pet reaches the Boundary Zone, the Receiver Collar gives a warning tone before delivering a safe Static Correction through the
Contact Points to get his attention until he returns to the Pet Area.
Key Definitions
Transmitter: Transmits the radio signal and is the center of the Pet Area.
The Transmitter needs to be located indoors.
Pet Area: Distance from the Transmitter where your pet can roam freely.
Boundary Zone: 2 to 3 foot wide area outside the Pet Area where your
pets Receiver Collar will begin to tone and then begin to deliver a
Static Correction. The correction will start in the Boundary Zone
and continue anywhere beyond the Pet Area.
Note: The Receiver Collar is equipped with a safety time-out
feature that will stop correcting after 15 seconds if your pet
remains outside the Pet Area.
Receiver Collar: Receives the radio signal from the Transmitter.
Mode Button: Turns receiver ON/OFF and adjusts the level
of Static Correction your pet receives outside the Pet Area.
Receiver Indicator Light: Indicates the level of correction
at which the Receiver Collar is set. This light also serves
as a low battery indicator.
Contact Points: Deliver the safe Static Correction when
your pet moves into the Boundary Zone.
Power Jack: Where the Power Adapter plugs into the Transmitter.
The Transmitter is powered by a standard 120 volt outlet.
Boundary Switch: Adjust according to the size of the Pet Area desired.
Low Range of 5 to 45 ft. is “–”; High Range of 5 to 90 ft. is “+.
Note: Adjusting the switch does not change the level of Static Correction on
the Receiver Collar.
Power Light: Indicates when the Transmitter is on.
Boundary Control Dial: Adjusts the distance from the Transmitter to the Boundary Zone.
Note: Adjusting the dial does not change the level of Static Correction on the Receiver Collar.
TransmitterReceiver Collar
Contact
Point
Receiver
Indicator
Light
Mode
Button
Boundary
Control Dial
Power
Jack
On/Off
Switch
I = On
O = Off
Boundary
Switch
+ = High
- = Low
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Petsafe PIF00-15002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Petsafe PIF00-15002 in the language / languages: English as an attachment in your email.

The manual is 2.14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info