770986
20
Zoom out
Zoom in
Previous page
1/24
Next page
20 +1 (800) 732-2677
Troubleshooting
I was setting up the
pet area and after
I turned down the
boundary control dial,
the receiver collar
would no longer beep
or correct.
You may have turned the boundary control dial down too quickly, causing the
receiver collar to go into power-fail mode. This is a safety feature designed to
protect your pet when power to the transmitter goes out. With the receiver collar
within 10 feet of the transmitter, readjust the boundary control dial as shown in
Step 4 and reset the boundary zone, making sure to turn the dial down slowly.
My next-door
neighbor has a
containment system
and the receiver collar
does not activate near
their property.
Your neighbor’s containment signal may interfere with the operation of the receiver
collar preventing activation close to their fence. To minimize the interference,
reduce the size of the pet area or move the transmitter away from your neighbor’s
system.
Adjust the pet area so that the receiver collar activates for at least 5 feet
beyond the reduced boundary setting when walking towards the neighboring
containment system.
The receiver collar has
injured my pets neck.
Failing to follow the important safety information at the front of the product
manual has caused pressure ulcers. Some descriptions of advanced pressure
ulcers describe the sores as looking like burns on the dog’s neck. Be assured
that electronic collars do not use enough energy to create electrical burns.
The energy in an output pulse is only a few thousandths of a Joule; it is similar
in nature to the static pulse that you may feel when getting out of your car. In
some cases, pressure ulcers are described as chemical burns. The battery in
your receiver collar is sealed, in addition, your collar’s housing is also sealed.
This sealing makes it virtually impossible, without misuse or abuse, for your
receiver collar battery to leak onto your pets neck. Please review and follow
the important safety information on page 3, and the instructions in Step 6 under
the heading “Fit the receiver collar” on page 14.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Petsafe PIF00-14288 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Petsafe PIF00-14288 in the language / languages: English as an attachment in your email.

The manual is 1.79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info