770986
6
Zoom out
Zoom in
Previous page
1/24
Next page
6+1 (800) 732-2677
B
O
U
N
D
A
R
Y
Z
O
N
E
Transmitter Pet Area
Note: In many
neighborhoods,
nearby property lines
may limit how large
the pet area can be.
Maximum
105 foot range
(53 average steps)
How the System Works
The PetSafe® Stay & Play Compact Wireless Fence system has been proven safe, comfortable, and effective for pets
over 5 pounds. The system works by transmitting a radio signal up to 105 feet in all directions. You temporarily define
the pet area with boundary flags for a visual aid in training your pet. Your pet wears a receiver collar with contact
points that touch his neck, and, once trained, is allowed to roam freely in the pet area. When your pet reaches the
boundary zone, the receiver collar gives a warning tone before delivering a safe static correction through the contact
points to get his attention until he returns to the pet area.
Key Definitions
Transmitter: Transmits the radio signal and is the center of the pet area.
The transmitter needs to be located indoors.
Pet Area: Distance from the transmitter where your pet can roam freely.
Boundary Zone: 2- to 3-foot-wide area outside the pet area where your pets receiver collar
will begin to tone and then begin to deliver a static correction. The correction will start in
the boundary zone and continue anywhere beyond the pet area.
Note: The receiver collar is equipped with a safety time-out feature
that will stop correcting after 15 seconds if your pet remains
outside the pet area.
Receiver Collar: Receives the radio signal from the transmitter.
Receiver Indicator Light: Indicates the level of correction
at which the receiver collar is set. This light also indicates
battery status.
Contact Points: Deliver the safe static correction
when your pet moves into the boundary zone.
Mode Button: Turns receiver on/off and adjusts the level of
static correction your pet receives outside the pet area.
Receiver Charger: Charges the batteries inside the receiver collar
Receiver Charge Jack: Connection point for charging receiver battery.
Power Light: Indicates when the transmitter is on.
Power Jack: Where the power adaptor plugs into the transmitter.
The transmitter is powered by a standard 120 volt outlet.
Boundary Switch: Adjust according to the size of the pet area desired.
Note: Adjusting the switch does not change the level of static correction on the receiver collar.
Boundary Control Dial: Adjusts the distance from the transmitter to the boundary zone.
Note: Adjusting the dial does not change the level of static correction on the receiver collar.
Alarm Disable Button: Silences power loss alarm and re-initiates the transmitter radio signal after metal interference
alarm activates.
Power Loss Alarm: Sounds an intermittent single tone alarm which indicates power has been removed from
the transmitter.
Metal Interference Alarm: Disables the transmitter radio signal to protect the transmitter from damage if placed too
close to metal objects.
Transmission Failure Alarm: Continuous tone which indicates a transmitter problem.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Petsafe PIF00-14288 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Petsafe PIF00-14288 in the language / languages: English as an attachment in your email.

The manual is 1.79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info