To set the LOCK time: This function needs to be carried out at the time of day when you wish the unit to CLOSE and remain LOCKED.
Enter the Extended Modes by pushing the Red and Green buttons simultaneously for more than 2 seconds, then press the red button once (the unit will beep
twice) then again (the unit will beep three times) then again (the unit will beep four times) then again (the unit will beep five times) then once again (the unit will
beep six times) then once again and the unit will beep 7 times and you have arrived at Timer Mode. To enter Timer Mode, press both Red and Green buttons
simultaneously, the green light will stay illuminated and the red light will flash.
Pressing and releasing the Red button quickly will set the LOCK time. On releasing the Red Button the Petporte smart flap® will return to its normal mode
of operation.
You must now activate Night Mode so that the unit recognizes the UNLOCK and LOCK times that you have programmed. To activate
Night Mode, press the Red button for less than 2 seconds.
Note:
1. The Timer Mode will only function when the unit is powered through the external power supply included with this unit. The Timer Mode is not available
when the unit enters battery backup mode.
2. In the event of a power cut, you will need to reset the unlock and lock times.
3. The Timer Mode supersedes the light level detector. The unit will no longer read the ambient light levels to decide if the unit should be locked or unlocked.
LED Indicator - Quick Guide
Explanation of LED Indicators:
Function
FlashFlashPower on but nothing programmed
OffOffNormal Operating Mode
Off (Day) / On (Night)OnNight Mode (Timer Mode)
OffFlashVet Mode
FlashOffOpen Mode
OnFlashBattery Level Low
Battery Backup Facility
Your Petporte smart flap® has the facility to fit a backup battery, ensuring your cat can still have access to your house in the event of a power cut on the low
voltage power supply. When the Petporte smart flap® is operating under battery-mode ONLY, it will scan for the cat’s microchip only AFTER the cat has
pressed against the flap, thus getting the battery out of sleep-mode.
To install batteries, remove the small cover plate with a screw driver and attach a 9-volt (IEC 6LR61) battery to the connecting snaps. Push battery into the
battery compartment and snap the small cover plate back in place.
Please note that the following functions are currently unavailable with your Petporte smart flap®, when the unit is being operated by battery alone:
1. Wall Mounting - Currently the Petporte smart flap® Battery Backup Facility is unable to function on a wall fitted unit.
2. Night Mode - Currently Night Mode is unavailable when the unit enters battery backup mode.
3. Programming – When the Petporte smart flap® is working on battery only, programming a cat into the unit, can be very difficult.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Petsafe Petporte smart flap - Microchip 100 series at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Petsafe Petporte smart flap - Microchip 100 series in the language / languages: Danish, Swedish, Norwegian, Finnish as an attachment in your email.
The manual is 5.87 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
Others manual(s) of Petsafe Petporte smart flap - Microchip 100 series
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
