Manual Peruzzo Venezia 388 (page 5 of 8) (English, French, Italian, Spanish)

807439

Zoom out

Zoom in

1/8

1. Pulire le parti della carrozzeria che verranno a con-

tatto con gli appoggi P in gomma del portaciclo,

2. Appoggiare il portaciclo sull’auto e agganciare le cin-

ghie F1 sul bordo superiore del portellone oppure

al bordo anteriore del cofano,

. Aggiustare l’al-

tezza del portaciclo tirando le cinghie fino a rag-

giungere il corretto posizionamento (dove previsto

usare l’adattatore I, vedi lista auto),

Provare ad aprire e chiudere lentamente il cofano/

portellone e fare attenzione che i ganci non dan-

neggino la carrozzeria. In tal caso usare l’adatta-

tore I.

3. Con auto provviste di barre longitudinali (railing),

preferire l’aggancio della cinghia F1 come da fig.

4. Per veicoli con spoiler, le cinghie superiori F1 non

devono essere a contatto con lo spoiler stesso

perchè potrebbero provocare danneggiamenti.

Procedere quindi al fissaggio corretto come mostra-

to in fig.

5. Non posare la parte inferiore del portaciclo

sulle parti orizzontali della carrozzeria o su

paraurti. Tenere il portabici in sospensione come

mostrato in fig.

6. Inserire i ganci G delle cinghie F2 (se in dotazio-

ne) ai lati di portellone o cofano utilizzando, dove

previsto, l’adattatore I (vedi lista auto). Tirare forte.

7. Agganciare le cinghie F3 nella parte inferiore del

portellone; se ciò non dovesse essere possibile,

fissarle alla parte inferiore del paraurti utilizzando,

dove previsto, l’adattatore I (vedi lista auto) e tirare

forte.

8. Se l’auto è provvista di gancio per traino, fissare la

cinghia F3 destra come da fig.

FISSAGGIO

DEL PORTACICLO

ATTENZIONE

I ganci di fissaggio G

, seppur provvisti della prote-

zione, possono ammaccare la carrozzeria dell’auto. Per

questa ragione, i ganci G sul portellone posterio-

re non devono essere a contatto con parti in vetro o

plastica; se ciò dovesse accadere, utilizzare l’adattato-

re I, se incluso, e seguire lo schema di fig.

. Nella

lista di adattabilità auto è specificata la posizione cor-

retta dell’adattatore I (nel caso in cui l’adattato-

re I non fosse incluso nella confezione, potete acqui-

starlo separatamente presso il punto vendita).

1. Clean the parts of the bodywork that will be in

contact with the rubber supports P of the bicy-

cle carrier,

2. Place the bicycle carrier on the car and hook the

straps F1 on the top edge of the door or the

front edge of the bonnet,

. Adjust the height

of the bicycle carrier by pulling the straps until

reaching the correct position (when provided for,

use the adapter I, see car list),

. Try

opening and closing bonnet/rear door slowly,

making sure the hooks do not damage the body-

work. In which case use the adapter I.

3. With cars equipped with railing, use the clasp of

strap F1 as shown in

4. For vehicles with spoiler, the upper straps F1 must

not be in contact with the spoiler because they

could cause damage. Therefore proceed with cor-

rect fixing as shown in

5. Do not place the bottom part of the bicycle

carrier on the horizontal parts of the bodywork

or on bumpers. Keep the bicycle carrier sus-

pended as shown in

6. Insert the claps G of straps F2 (if supplied) at

the sides of the door or bonnet using the adapt-

er I (when provided for) (see car list). Pull hard.

7. Hook the straps F3 in the bottom part of the

door; if this is not possible, fix them to the bottom

part of the bumper using the adapter I (when

provided for) (see car list) and pull hard.

8. If the car is equipped with a tow hook, fix the right

strap F3 as shown in

FIXING THE BICYCLE

CARRIER

IMPORTANT

Although provided with protection, the fixing

clasps G

can dent the car bodywork. Therefore the

clasp G on the rear door must not be in contact

with glass or plastic parts; in the event this occurs, use

adapter I, if included, and follow the layout of fig.

. The car adaptability list specifies the correct posi-

tion of the adapter I (if adapter I is not included in

the package, you can purchase one separately at the

sales outlet).

1. Limpiar las partes de la carrocería que entrarán en con-

tacto con los soportes P de caucho del portabici,

2. Apoyar el portabici sobre el coche y enganchar las

correas F1 en el borde superior de la puerta trasera o

bien en el borde anterior del maletero,

. Ajustar la

altura del portabici tirando de las correas hasta lograr

el posicionamiento correcto (donde previsto usar el

adaptador I, ver lista coches),

. Intentar

abrir y cerrar lentamente el capó/puerta trasera y poner

atención para que los ganchos no dañen la carrocería. Si

eso ocurriera, usar el adaptador I.

3. Con coches provistos de barras longitudinales (railing),

es mejor el enganche de la correa F1 según explica

la fig.

4. Para vehículos con spoiler, las correas superiores F1 no

tienen que estar en contacto con el spoiler mismo pues-

to que podrían provocar daños. Proceder entonces a la

sujeción correcta según se explica en la fig.

5. No apoyar la parte inferior del portabici sobre las

partes horizontales de la carrocería o sobre el para-

choques. Mantener el portabici en suspensión según

se explica en la fig.

6. Introducir los ganchos G de las correas F2 (si están

en dotación) en los lados de la puerta posterior o del

maletero utilizando, donde previsto, el adaptador I (ver

lista coches). Tirar fuerte.

7. Enganchar las correas F3 en la parte inferior de la puer-

ta posterior; si no fuese posible hacerlo, hay que sujetar-

las a la parte inferior del parachoques utilizando, donde

previsto, el adaptador I (ver lista coches) y tirar fuerte.

8. Si el coche tiene gancho para remolque, sujetar la

correa F3 derecha según se explica en la fig.

SUJECIÓN DEL PORTABICI

ATENCIÓN

Los ganchos de sujeción G

, aunque estén dotados

de su protección, pueden abollar la carrocería del

coche. Por esta razón, los ganchos G en la puerta

posterior no tienen que estar en contacto con partes

de vidrio o de plástico; si eso ocurriese, utilizar el adap-

tador I, si está incluido, y seguir el esquema de fig.

. En la lista de adaptabilidad coche está especificada

la posición correcta del adaptador I (en el caso en

que el adaptador I no estuviese incluido en la confec-

ción, puedes adquirirlo por separado en el mismo

punto venta).

I GB E

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Peruzzo Venezia 388 in the language / languages: English, French, Italian, Spanish as an attachment in your email.

The manual is 9.22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Peruzzo Venezia 388

Peruzzo Venezia 388 Additional guide - All languages - 28 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Peruzzo Venezia 388 Manual

Product: