742528
11
Zoom out
Zoom in
Previous page
1/50
Next page
LANGUAGES
Themenuoftheradiocanbeconguredtovariouslanguages.
1. Press the On/Off button to turn on the radio.
2. Press the Menu button, and then rotate the Tuning knob until the display shows
“System”.
3. Press the Tuning knob; rotate the Tuning knob until the display shows “Language”.
4. Press the Tuning knob to enter the language adjustment menu.
5. Rotate the Tuning knob until the desired language appears on the display (default
is English).
6. Press the Tuning knobtoconrmyourchoice.Thedisplaymenuwillchangetothe
chosen language.
SOFTWARE VERSION
The software display cannot be altered and is just for your reference. You can only view
the software version in DAB and FM mode.
1. Press the On/Off button to switch on the radio.
2. Press the Source button to select FM or DAB mode.
3. Press the Menu button until the display shows “Full Scan”, and then rotate
the Tuning knob until the display shows “System”.
4. Press the Tuning knob; rotate the Tuning knob until the display shows
“SW version”.
5. Press the Tuning knob to view the software version.
6. Press the Tuning knob to back to last menu and press menu to return to
the normal radio display.
Note: USB socket inside battery compartment is for upgrading the software of the device
if needed.
SYSTEM RESET
If the radio fails to operate correctly, or some digits on the display are missing or
incomplete, carry out the following procedure.
1. Press the On/Off button to switch on the radio.
2. Press the Menu button,
3. Rotate the Tuning knob until the display shows “System”. Press the Tuning knob.
4. Rotate the Tuning knob until the display shows “Factory reset”. Press the
Tuning knob.
5. Rotate the Tuning knob to select between “Yes” or “No”. Select “Yes” if you wish
to reset the radio, otherwise, select “No”.
6. Press the Tuning knob to cause the factory reset.
7. A full reset will be performed. All presets and the station list will be erased.
All settings will be set to the default values. The display will show “WELCOME
TO DIGITAL RADIO” for a few seconds, and then the radio will automatically
perform an auto scan of the Band III DAB channels and the FM band, the display
will show “Scanning” at DAB and “Auto” at FM.
In case of malfunction due to electrostatic discharge; reset the product as above to
resume normal operation. If you are not able to perform the reset operation as above,
remove and reconnect all batteries and the power supply.
BACKLIGHT
LCD backlight conguration
1. Press the On/Off button to turn on the radio.
2. Press the Menu button, and then rotate the Tuning knob until the display shows
“System”.
3. Press the Tuning knob; rotate the Tuning knob until the display shows “LCD
backlight”.
4. Press the Tuning knob to enter the LCD backlight adjustment menu.
5. Rotate the Tuning knob to select “on” in order to keep backlight always lightened
when the radio is turned on with AC power supply;
6. Or rotate the Tuning knob to select “off” (by default) so that the backlight will be
lightened for about 10 seconds whenever a button is pressed with AC power
supply.
7. Press the Tuning knobtoconrmyourchoice.
Note: The LCD backlight option “on” is only functional when the radio is powered
by AC power supply. When the radio is powered by battery power supply, the
LCD backlight is switched to option “off” – 10 seconds lightened when a button is
pressed. When the radio is connected to mains AC power again, the last user
setting will be applied again.
17 18
GB
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PerfectPro WS2BT - WORKSTATION 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PerfectPro WS2BT - WORKSTATION 2 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info