742393

PerfectPro TBX1 - Teambox Manual

10
Zoom out
Zoom in
Previous page
1/54
Next page
15 16
GB
GB
WiFi networks and cordless phones generally use similar radio frequencies to Bluetooth
and may interfere with one another. If any interference is noticed, then try relocating the
Teambox or one of the other devices.
The Bluetooth capabilities of your Teambox enable it to receive audio from many
Bluetooth capable devices including mobile phones, personal computers and tablets.
Only one Bluetooth device can be connected to your Teambox at a time. It supports the
following Bluetooth proles and functionality.
•
Your Teambox supports A2DP (Advanced Audio Distribution Prole) which is a
audio connection that streams music from PCs, mobile phones etc. SBC and AAC
audio codecs are supported.
•
Your Teambox supports AVRCP (Audio Video Remote Control Prole) that allows
your radio to control music playback from the connected device.
•
Note: Some mobile phones may temporarily disconnect from your Teambox when
you make or receive calls. Some devices may temporarily mute their Bluetooth audio
streaming when they receive text messages, emails or for other reasons unrelated to
audio streaming. Such behaviour is a function of the connected device and does not
indicate a fault with your Teambox.
Pairing Bluetooth with your mobile phone
1. Press the Power button to turn on the radio.
2. Select Bluetooth mode by pressing the Source button.
3. The LCD display will show “Connecting” when radio is not yet paired with your
mobile phone. At the same time, the Bluetooth icon will be blinking as the Bluetooth
is in searching mode.
4. In your mobile phone open the Setting menu and select Bluetooth, then select
“Teambox” in the Bluetooth devices list (Bluetooth pairing instructions may vary per
type of mobile phone, please check your mobile phone manual).
5. When Bluetooth pairing is successful, the LCD display will show the name of the
mobile device. At the same time, the Bluetooth icon will be lightened.
6. After that, the LCD display will show the connected mobile phone’s name to indicate
the connected device to the radio.
Playing music from your mobile phone
1. Press the Power button to turn on the radio.
2. Select Bluetooth mode by pressing the Source button.
3. Start playing music by using the media players in the paired mobile phone.
4. Playback can be controlled from the mobile phone or by pressing the Preset / ►||,
Tuning <<, and Tuning >> buttons on the radio.
5. After music playback started, the name of the song will be displayed in the LCD.
Display modes
In Bluetooth mode, the radio can display a range of information of the current playing
music on the display. Press the Select / Info button to cycle through the various types.
a. Title Displays scrolling song’s name of the current playback music.
b. Artist Displays the artist’s name of the current playback music.
c. Album Displays the album name of current playback music.
d. Time and date Display the current time and date.
Device List – Connect to the paired device
In the radio, you can select the Bluetooth device from the device list to connect again.
The device names would be shown if the name of the Bluetooth devices were congured
in the mobile devices. Please refer to the user manual of your mobile device for the
congurations.
The device lists can be checked as below:
1. In Bluetooth mode, press the Menu button to enter the system setting. The display
will show “Discoverable”.
2. Press the Tuning << or Tuning >> button until “Device list” is displayed; press the
Select / Info button to select the setting.
3. Press the Tuning << or Tuning >> button to view the name of the devices.
4. Press the Select / Info button to start Bluetooth reconnection. The radio will
automatically connect to this mobile device.
Note: There can be up to 8 device names to be stored in the speaker. If there are more
than 8 mobile devices have been connected and stored into the speakers, the earliest
paired device name will be erased.
Note: If you have ever deleted the “Teambox” from your connected mobile device, the
auto reconnection will be unsuccessful.
Restart Bluetooth pairing
The Bluetooth function can be set to operate in different ways as below:
1. In Bluetooth mode, press the Menu button to enter the system setting. The display
will show “Discoverable”, press the Select / Info button to activate Bluetooth
discovery function.
2. The LCD display will show “Connecting”, and the Bluetooth icon will be ashing at
the same time. Now, the radio’s Bluetooth is free for any mobile phone connection
as it is in discoverable mode now.
Note: “Discoverable” is the option that forces the Bluetooth of this radio to disconnect
from your mobile phone and enter the “discoverable mode”. This is the way to allow
the Bluetooth pairing to another device. If no new device is paired, the Bluetooth will
automatically try to connect to the last device when it is switched off and on again.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PerfectPro TBX1 - Teambox at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PerfectPro TBX1 - Teambox in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info