742393
9
Zoom out
Zoom in
Previous page
1/54
Next page
13 14
GB
GB
Display modes
When you are listening to a FM station with RDS system, repeatedly press the Select /
Info button to cycle through the information. This will only function if the reception level
is sufcient and clear.
a. Radio text Displays the message about the station being listened to as
ticker text.
b. Program type Displays the type of station being listened to, e.g. Pop,
Classic, News, etc.
c. Signal strength Displays signal strength for the station being listened to.
d. Frequency Displays the frequency of the station being listened to.
e. Date Displays the date of today.
Scan sensitivity setting
The radio will normally scan all stations from FM broadcasts including the weaker
signals. However, you may wish the Auto-scan to nd only those stations with strong
enough signals to give good reception.
1. Press the Power button to turn on the radio.
2. Select the FM band by pressing the Source button.
3. Press the Menu button, the display shows “Scan setting”; Then press the Select /
Info button to enter.
4. Press the Tuning << or Tuning >> button to select between “All stations” or
“Strong stations only” (default is “Strong stations only”).
The “Strong station” option will allow the radio to nd strong signals only when
scanning.
5. Press the Select / Info button to conrm your setting. The display will return to
normal radio display.
PRESET STATIONS
Storing preset stations
There are 20 memory presets in the radio, 10 for DAB and 10 for FM. Presets are
remembered by the radio in the event of a power failure.
1. Press the Power button to turn on the radio.
2. Press the Source button to select the desired waveband.
3. Tune to the required station.
4. Press and hold the Preset button until the display shows for example “Preset 01:
Empty”.
5. Press the Tuning << or Tuning >> button to select the desired preset number,
then press the Select / Info button to conrm saving preset. The display will show,
for example, “Preset 01 Stored”.
6. Repeat step 3 to 5 for the remaining presets.
7. Stations stored in the preset memories can be over-written by following the above
procedure.
Recalling preset stations
1. Press the Power button to turn on the radio.
2. Press the Source button to select the desired waveband.
3. Press the Preset button until shows for example “Preset 01: 88.10MHz”.
4. Press the Tuning << or Tuning >> button to select the desired preset number,
then press the Select / Info button to recall the preset.
5. The display will show, e.g. “P01”, at the end of rst line.
BLUETOOTH
The Bluetooth mode on your Teambox allows you to play audio, play sound from video
les and stream music from Bluetooth capable devices such as your mobile phone,
computer, tablet etc. through your Teambox loudspeaker.
•
When a Bluetooth enabled device such as your Teambox is in a ‘discoverable’
state other Bluetooth devices can detect, pair with or connect to it.
•
‘Bluetooth pairing’ occurs when two Bluetooth enabled devices agree to establish a
connection and communicate with each other.
Bluetooth connectivity performance may vary depending on the connected Bluetooth
devices. Please refer to the Bluetooth capabilities of your device before connecting to
your Teambox. All features may not be supported on some paired Bluetooth devices.
A Bluetooth connection can provide a link for audio up to a distance of approximately ten
metres. When pairing two Bluetooth enabled devices, for convenience, we recommend
they should be no more than 2 to 3 metres apart. The presence of other functioning
Bluetooth devices during connection may lead to operational difculties.
Bluetooth is a short-range radio communication system and generally Bluetooth devices
can communicate with each other clearly within a regular sized room or ofce. The
reliability of a Bluetooth connection between different rooms will greatly depend upon
the construction of the building.
Bluetooth communication range may be substantially reduced if the signal passes
through a solid object. Human bodies, brick and concrete walls, heavy furniture or
bookcases will all reduce the operational range of your Bluetooth devices to a greater
or lesser extent. Glass, dry-wall or wood panelled walls and ofce partitions may have
a less severe but noticeable effect. Metal pipes, foil-lined plasterboard, metal window
frames and domestic wiring can also have an effect. You should position your Bluetooth
devices closer to each other if you observe communication difculties.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PerfectPro TBX1 - Teambox at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PerfectPro TBX1 - Teambox in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info