Manual PerfectPro TBox2 - TOUGHBOX 2 (page 12 of 57) (English, German, Dutch, French)

742525

Zoom out

Zoom in

1/57

Setting tuning step-FM/AM

1. Press and hold the Menu button to enter the menu setting.

2. Rotate the Tuning control until “FACTORY” shows on the display. Press the Tuning control to enter

the setting menu.

3. Rotate the Tuning control until ‘FM X K’ or ‘AM X K’ shows on the display. Press the Tuning control

to enter the setting.

4. Rotate the Tuning control to choose the desired FM tuning step (50 kHz or 100 kHz) or AM tuning

step (9 kHz or 10 kHz). Press the Tuning control to conrm the setting.

Note:

Re-setting the AM tuning step will erase all the preset AM stations.

Soft Mute (S-MUTE)

Soft Mute is to reduce background noise during weak signal, however it will also reduce radio recep-

tion. The initial setting for Soft Mute is ON. Soft Mute can be set either radio is on or off.

1. Press and hold the Menu button to enter the setting menu.

2. Rotate the Tuning control until “SOFTMUTE” is shown on the display. Press the Tuning control to

enter the setting.

3. Rotate the Tuning control to select “ON” or “OFF”, then press the Tuning control to conrm the

setting.

Treble/Bass control

You may set up a custom treble and bass as following.

1. Press and hold the Tone control until “TREBLE” appears on the display.

2. Rotate the Tone control to adjust the treble level (between-5 and+5). The sound will change as you

adjust the level. Press the Tone control to conrm the setting. Now you can adjust Bass control.

3. Rotate the Tone control until the desired bass level (between -5 and +5) is displayed. The sound

will change as you adjust the level. Press the Tone control to conrm the setting.

Loudness

The Loudness function enables to get compensation on lower and higher frequency. The effect will

be more audible when the radio is in a lower volume level (Dynamic Loudness).

1. Press the Loudness button to turn on the loudness function. In the display the “Loudness”

indicator will be shown.

2. To turn off the loudness function, press the Loudness button again. The “Loudness” indicator will

not be shown anymore.

Auxiliary input socket

A 3.5mm Auxiliary Input socket is provided on the right side of your radio to permit an audio signal to

be fed into the unit from an external audio device such as iPod, MP3 or CD player.

1. Repeatedly press and release the Source button until “AUX IN” is shown on the display.

2. Connect an external audio source (for example, iPod, MP3 or CD player) to the Auxiliary Input

socket.

3. Adjust the volume setting on your iPod, MP3 or CD player to ensure an adequate signal level from

the player, and then rotate the Volume control on the radio as needed for comfortable listening.

Note: Never use the Aux-In socket in rainy or moist conditions to prevent moist from entering the ra-

dio. Always keep the rubber cover on the side well closed under these conditions.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of PerfectPro TBox2 - TOUGHBOX 2 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

PerfectPro TBox2 - TOUGHBOX 2 Manual

Product: