742547
10
Zoom out
Zoom in
Previous page
1/55
Next page
TONE
The Tone function enables the user to adjust the lower and higher sound frequencies.
1. Press the ON / OFF button to turn on the radio.
2. Press and hold the VOLUME/TONE knob for about 3 seconds, the display shows
“BASS 0”.
3. Rotate the VOLUME/TONE knob to set the desired Bass level.
4. Press the VOLUME/TONE knobtoconrm,thedisplayshows“TREBLE0”.
5. Rotate the VOLUME/TONE knob to set the desired Treble level.
6. Press the VOLUME/TONE knobtoconrmandreturntonormaldisplay.
LANGUAGE SETTING
Theradiocanbeconguredtoadifferentlanguage.
1. Press the ON/OFF button to turn on the radio.
2. Press the MENU button, and then rotate the TUNING/SEEK knob until the display
shows “System”.
3. Press the TUNING/SEEK knob; rotate the TUNING/SEEK knob until the display
shows “Language”.
4. Press the TUNING/SEEK knob to enter the language adjustment menu.
5. Rotate the TUNING/SEEK knob until the desired language appears on the display
(default is English).
6. Press the TUNING/SEEK knobtoconrmyourchoice.Thedisplaywillchangeto
the chosen language.
SOFTWARE VERSION
The software display cannot be altered and is just for your reference. You can only view
the software version in DAB, FM or Bluetooth mode.
1. Press the ON/OFF button to switch on the radio.
2. Press the SOURCE button to select FM or DAB, or Bluetooth mode.
3. Press the MENU button until the display shows “Full Scan” at DAB, or "Scan
setting" at FM, or "Disconnect BT" at Bluetooth mode, and then rotate the TUNING/
SEEK knob until the display shows “System”.
4. Press the TUNING/SEEK knob; rotate the TUNING/SEEK knob until the display
shows “SW version”.
5. Press the TUNING/SEEK knob to view the software version.
6. Press the TUNING/SEEK knob back to the last menu, and press the TUNING/
SEEK knob again to return to the normal radio display.
Notes: USB socket inside battery compartment is for upgrading the software of the
device.
SYSTEM RESET
If the radio fails to operate correctly, or some digits on the display are missing or
incomplete, carry out the following procedure.
1. Press the ON/OFF button to switch on the radio.
2. Press the MENU button,
3. Rotate the TUNING/SEEK knob until the display shows “System”. Press the
TUNING/SEEK knob.
4. Rotate the TUNING/SEEK knob until the display shows “Factory reset”. Press the
TUNING/SEEK knob.
5. Rotate the TUNING/SEEK knob to select between “Yes” or “No”.
6. Select “Yes” if you wish to reset the radio; otherwise, select “No” to cancel the
selection.
7. Press the TUNING/SEEK knob to cause the factory reset.
8. A full reset will be performed. All presets and the station list will be erased. All
settings will be set to the default values.
The display will show “WELCOME TO DIGITAL RADIO” for a few seconds, and then the
radio will automatically perform an auto scan of the Band III DAB channels and the FM
band.
In case of malfunction due to electrostatic discharge; reset the product as above to
resume normal operation. If you are not able to perform the reset operation as above,
remove and reconnect the power supply.
BACKLIGHT
LCD backlight conguration
1. Press the ON/OFF button to turn on the radio.
2. Press the MENU button, and then rotate the TUNING/SEEK knob until the display
shows “System”.
3. Press the TUNING/SEEK knob; rotate the TUNING/SEEK knob until the display
shows “LCD backlight”.
4. Press the TUNING/SEEK knob to enter the LCD backlight adjustment menu.
5. Rotate the TUNING/SEEK knob to select “on” in order to keep backlight always
lightened when the radio is turned on with AC power supply;
6. Or rotate the TUNING/SEEK knob to select “off” (by default) so that the backlight
will be lightened for about 10 seconds whenever a button is pressed with AC power
supply.
7. Press the TUNING/SEEK knobtoconrmyourchoice.
Note: The LCD backlight option “on” is only functional when the radio is powered by AC
power supply. When the radio is powered by battery power supply, the LCD backlight
is switched to option “off” – 10 seconds lightened when a button is pressed. When the
radio is connected to mains AC power again, the last user setting will be applied again.
GB
1817
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PerfectPro SLIM 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PerfectPro SLIM 2 in the language / languages: English, German, Dutch, French, Norwegian as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info