742547

PerfectPro SLIM 2 Manual

9
Zoom out
Zoom in
Previous page
1/55
Next page
GB
1615
AUX IN MODE
A 3.5mm stereo Aux In socket is provided on the side behind the rubber cover, for
connecting an external audio device such as MP3 player or CD player (not included with
this radio).
1. Connect an audio SOURCE to the Aux In socket on the backside of the radio.
2. Press the SOURCE button to select AUX input. Display will show “AUX IN”.
3. Play the external player.
4. Adjust the volume of both the radio and the player for comfortable listening.
5. After use, close the rubber cover to prevent moist or dust from entering into the
sockets and radio.
Notes: Never use the AUX-IN socket in rainy or moist conditions to prevent moist from
entering the radio. Keep the rubber cover closed under these conditions.
The Auto-Power management function will be activated in AUX mode. If there is no
signal* from the AUX input jack for a period over 15 minutes, the unit will automatically
switch to standby mode. The operation indicator and the LCD will go off in such case.
Pressing the ON/OFF button will wake up the unit.
* Also when the incoming signal from the external device is too low and cannot be
detected for a period of over 15 minutes by the Auto-Power management, the radio will
switch to standby mode.
To prevent this raise the output level of the external device enough to be detected.
SETTING THE CLOCK
The clock can only be set when the radio is in standby mode. If no buttons are pressed
for 5 seconds, the radio will exit the clock setup and the setting is cancelled.
1. Press and hold the TUNING/SEEK knobfor12secondsuntilthehourdigitsash
on the display.
2. Rotate the TUNING/SEEK knob to set the hour.
3. Press the TUNING/SEEK knobtoconrm,theminutedigitsash.
4. Rotate the TUNING/SEEK knob to set the minute.
5. Press the TUNING/SEEK knobtoconrm,thedayashesonthedisplay.
6. Rotate the TUNING/SEEK knob to set the current day.
7. Press the TUNING/SEEK knobtoconrm,themonthashes.
8. Rotate the TUNING/SEEK knob to set the current month.
9. Press the TUNING/SEEK knobtoconrm,theyearwillthenashonthedisplay.
10. Rotate the TUNING/SEEK knob to set the current year.
11. Press the TUNING/SEEK knobtoconrm,“SYNCLOCKON”ashes.
12. Rotary the TUNING/SEEK knob to select “SYNCLOCK ON” or “SYNCLOCK OFF”.
13. Press the TUNING/SEEK knobtoconrmandnishtheclocksetting.
SETTING THE ALARM
The alarm can only be set when the radio is in standby mode. If no buttons are pressed
for 10 seconds, the radio will exit the alarm setup and the setting is cancelled. Or press
the MENU button during alarm setup, the radio will also return to standby mode without
saving the adjusted alarm settings.
Setting the alarm clock
1. Press the MENU button for about 3 seconds, the display shows “ALARM SET” and
thehourdigitsashonthedisplay.
2. Rotate the TUNING/SEEK knob to set the hour.
3. Press the TUNING/SEEK knobtoconrm.Theminutedigitsash.
4. Rotate the TUNING/SEEK knob to set the minute.
5. Press the TUNING/SEEK knobtoconrm.
6. Thedisplaywillthenshow“ALARMSOURCE”.Youmaychoose“BUZZER”,“DAB”
or “FM RADIO”. Rotate the TUNING/SEEK knob to select. If “DAB” is selected, the
lastlistenedstationwillbeplayedwhenthealarmres.
7. Press the TUNING/SEEK knobtoconrm.
8. The display will then show “VOL XX”. Rotate the TUNING/SEEK knob to change
the alarm volume.
9. Press the TUNING/SEEK knobbuttontoconrm.
Switching on/ off the alarm
To switch the alarm on, press the MENU buttonbriey.Thealarmiconwillbeshown
at the top left corner. To switch the alarm off, press the MENU buttonbrieyagain.The
alarm icon will be disappeared.
Press the ON/OFF buttontoturnoffthealarmwhenitisring.
LOUDNESS
The Loudness function enables to get compensation on lower and higher frequency.
The effect will be more audible when the radio is in a lower volume level (Dynamic
Loudness).
1. Press the LOUDNESS button to enable the loudness, the display shows
“Loudness On”.
2. Press the LOUDNESS button again to disable the loudness, the display shows
“Loudness Off”.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PerfectPro SLIM 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PerfectPro SLIM 2 in the language / languages: English, German, Dutch, French, Norwegian as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info