Manual PerfectPro SD1 - Soliddigital (page 9 of 33) (English, German, Dutch, French)

742517

Zoom out

Zoom in

1/33

BACKLIGHT

LCD backlight conguration

1. Press the On/Off button to turn on the radio.

2. Press the Menu button, and then rotate the Tuning knob until the display shows

“LCD backlight”.

3. Press the Tuning knob to enter the LCD backlight adjustment menu.

4. Rotate the Tuning knob to select “on” in order to keep backlight always lightened

when the radio is turned on with AC power supply;

5. Or rotate the Tuning knob to select “off” (by default) so that the backlight will be

lightened for about 10 seconds whenever a button is pressed with AC power supply.

6. Press the Tuningknobtoconrmyourchoice.

WARRANTY

This radio has a 2 year limited warranty.

WARNING ! Warranty becomes void once the radio cabinet has been opened or

any modications or alterations to the radio have been made !

The terms of the warranty of this radio do not cover the following:

- Damage caused by misuse, abuse, neglect, alterations, accidents or unauthorised

repair.

- Normal wear and tear.

- Breaking or bending of the metal telescopic antenna

SPECIFICATIONS

Power requirements

Mains AC230V ~, 50Hz

Frequency coverage

DAB 174,928 – 239,200 MHz

FM 87.5 – 108 MHz

Circuit features

Loudspeaker 1 x ø4 inch

Output power 1 x 5w

Aux In socket ø3.5 mm

Environmental note

This product has been manufactured with high quality parts and

materials, which can be reused and recycled.

Therefore, do not throw the product away with normal household

waste at the end of its service life. Take it to a collection point for the

recycling of electrical and electronic device. This is indicated by this

symbol on the product, in the operating manual and on the packaging.

Pleasendoutaboutcollectionpointsoperatedbyyourlocalauthority.

Help protect the environment by recycling used products.

5. Press the Tuning knob to view the software version.

6. Press the Tuning knob to back to last menu and press menu to return to the normal

radio display.

SYSTEM RESET

If the radio fails to operate correctly, or some digits on the display are missing or

incomplete, carry out the following procedure.

1. Press the On/Off button to switch on the radio.

2. Press the Menu button,

3. Rotate the Tuning knob until the display shows “System”. Press the Tuning knob.

4. Rotate the Tuning knob until the display shows “Factory reset”. Press the Tuning knob.

5. Rotate the Tuning knob to select between “Yes” or “No”. Select “Yes” if you wish to

reset the radio, otherwise, select “No”.

6. Press the Tuning knob to cause the factory reset.

7. A full reset will be performed. All presets and the station list will be erased. All

settings will be set to the default values. The display will show “WELCOME TO

DIGITAL RADIO” for a few seconds, and then the radio will automatically perform

an auto scan of the Band III DAB channels and the FM band, the display will show

“Scanning” at DAB and “Auto” at FM.

In case of malfunction due to electrostatic discharge; reset the product as above to

resume normal operation. If you are not able to perform the reset operation as above,

remove and reconnect all batteries and the power supply.

INFORMATION ON THE METAL TELESCOPIC ANTENNA

The antenna placed on this radio is a long, metal telescopic antenna.

ThisantennaisNOTexibleorbendableandshouldbeusedwithcare.

When used in a dusty or dirty environment please clean the antenna from time to

time with a dry cloth to ensure normal operation. When used in a wet, moist or dirty

environmentitisadvisedtoregularly,afterrstcleaningwithadrycloth,thinlyapplya

universal protection oil (like e.g. WD40) with a cloth to prevent rust and corrosion and to

ensure normal operation.

ADDITIONAL FLEXIBLE PLASTIC ANTENNA (SUPPLIED WITH THE RADIO IN THE

BOX)

You can use this as an alternative antenna for your radio in a situation where the metal

telescopic antenna is too vulnerable.

Installing: Carefully screw off the standard metal telescopic antenna. First carefully

loosen the

antenna with an open-end-wrench (size 14) – turn counter anti-clockwise.

Carefullyscrewontheexibleplasticantennaandsoftlytightenitwithanopen-end

wrench key (size 14) – turn clockwise.

ATTENTION: In order to prevent the antennas’ thread from breaking off or being

damaged do not over-tighten antennas with the spanner.

13 14

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of PerfectPro SD1 - Soliddigital in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

PerfectPro SD1 - Soliddigital Manual

Product: