Manual PerfectPro SD1 - Soliddigital (page 8 of 33) (English, German, Dutch, French)

742517

Zoom out

Zoom in

1/33

11 12

TONE (BASS/TREBLE SETTINGS)

The Tone function enables the user to adjust the lower and higher sound frequencies.

1. Press the On/Off button to turn on the radio.

2. Press the Tone button, the display shows “BASS 0”.

3. Rotate the Tuning knob to set the desire Bass level.

4. Press the Tuningknobtoconrm,thedisplayshows“TREBLE0”.

5. Rotate the Tuning knob to set the desire Treble level.

TIME AND DATE SETTINGS

1. The displayed clock will automatically synchronize with the time and date of a DAB

station or a FM RDS radio station (if available, please see “RDS station service”).

2. To manually set the time and date, turn off the radio by pressing the On/Off button.

3. Press and hold the Tuning knobforabout12seconds,untiltheclockashesinthe

display.

4. Rotate the Tuning knob to adjust the data and then press the Tuning knob to

 conrmeachpartoftherequiredtimeanddate.

5. Selectandconrm“SynclockOn”whenyouwantthetimeanddatetobeupdated

 bytheRDSsignal.Selectandconrm“SynclockOff”whenyouwanttodisablethe

time and date to be updated by either DAB signal or FM RDS signal and keep your

own manually set time and date.

Note: When disconnecting the radio from AC power the time setting will be lost and will

have to be picked up again from the radio signal the next time the radio is used again

in DAB or FM Radio mode. Menu settings and station presets are stored in the internal

memory and are not lost when the radio is disconnected from AC power.

RADIO TIME SYNCHRONISATION

If “SYNCLOCK ON” is selected, the symbol“ ” will show on the clock display. Some

RDS stations transmit a time signal. If reception is good and you have selected the

“SYNCLOCK ON” option during the time setting, the time will be automatically updated

(“ ” ashesonthedisplay).Timesynchronizationcouldtakeseveralminutes.The

automatic time setting is always activated when the radio is switched from standby to

DAB or FM broadcasting with receives a RDS station.

ALARM SETTINGS

The alarm settings can only be changed when the radio is off (in standby mode).

If no buttons are pressed for 5 seconds, the radio will exit the alarm setup menu and the

settings are cancelled.

Setting the alarm time (only possible in standby mode)

1. Press the Menu button once and rotate the Tuning knob until the display shows

“Alarm Set”.

2. PresstheTuningknobtoenterandthehourdigitsashonthedisplay.

3. Rotate the Tuning knob to set alarm hours.

4. PresstheTuningknobtoconrm.Theminutedigitsash.

5. Rotate the Tuning knob to set alarm minute.

6. PresstheTuningknobtoconrm.

7. The display will then show “Alarm Source”. You may choose either “Buzzer”, “DAB”

or “FM Radio”. Rotate Tuning knob to select. If “DAB” or “FM Radio” is selected, the

last listened station will be played when the alarm rings.

8. The display will then show “Alarm Volume”. Rotate the Volume knob to set the

alarm volume.

9. PressTuningknobtoconrm.

10. The alarm icon (a bell shape) will be shown on the display, left next to the time.

Switching on/off the alarm (only possible in standby mode)

1. To switch the alarm on, press and hold the Info button and the alarm icon (a bell

shape) will be shown on the display, left next to the time.

To switch it off, press and hold the Info button again.

2. To turn off the alarm when it buzzes, simply press the On/Off button.

LANGUAGES

Themenuoftheradiocanbeconguredtovariouslanguages.

1. Press the Menu button, and then rotate the Tuning knob until the display shows “System”.

2. Press the Tuning knob; rotate the Tuning knob until the display shows “Language”.

3. Press the Tuning knob to enter the language adjustment menu.

4. Rotate the Tuning knob until the desired language appears on the display (default

is English).

5. Press the Tuningknobtoconrmyourchoice.Thedisplaymenuwillchangetothe

chosen language.

SOFTWARE VERSION

The software display cannot be altered and is just for your reference. You can only view

the software version in DAB and FM mode.

1. Press the On/Off button to switch on the radio.

2. Press the Source button to select FM or DAB mode.

3. Press the Menu button until the display shows “Full Scan”, and then rotate the

Tuning knob until the display shows “System”.

4. Press the Tuning knob; rotate the Tuning knob until the display shows “SW version”.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of PerfectPro SD1 - Soliddigital in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

PerfectPro SD1 - Soliddigital Manual

Product: